Ofna Ultra GTP2e
#946
Tech Adept
#947
#948
Got mine today and will start building this weekend! Anything I should know before I begin? Thanks guys.
#950
#951
Tech Adept
#952
#953
#954
What type of adhesive are you guys using to glue the stock foams together? Just super glue or no?
#955
Tech Regular
iTrader: (19)
Just got my GTP2E assembled and tried to take it out today. Not even 10 seconds of driving and I completely stripped out the plastic spur gear all around.
Now Im trying to find out what I did wrong and I think I know just want to confirm.
My setup is:
Mamba Monster
Neu Castle 2200kv
5s 40c
One thing I did was I used a 18t pinion off of my erevo setup which is 32 pitch I believe. A guy at my LHS told me that MOD1 and 32 pitch are identical. Im guessing that he is probably wrong and this is how it all happened. Or is the 2200Kv on 5s too powerful for the stock plastic gear?
You guys are the pros here so I figured Id ask. I did made sure the mesh was set well. The allen bolts holding the motor in were very tight and I dont believe the motor shifted causing this.
Now Im trying to find out what I did wrong and I think I know just want to confirm.
My setup is:
Mamba Monster
Neu Castle 2200kv
5s 40c
One thing I did was I used a 18t pinion off of my erevo setup which is 32 pitch I believe. A guy at my LHS told me that MOD1 and 32 pitch are identical. Im guessing that he is probably wrong and this is how it all happened. Or is the 2200Kv on 5s too powerful for the stock plastic gear?
You guys are the pros here so I figured Id ask. I did made sure the mesh was set well. The allen bolts holding the motor in were very tight and I dont believe the motor shifted causing this.
#957
Tech Regular
iTrader: (19)
Thanks the5, I figured that was the issue. I guess going off of what some people say isnt always correct. Im just going to order a new metal spur now anyway and a bigger MOD1 pinion too. I should have tried the 14t pinion that came with the kit but I got too antsy and wanted it to haul butt from the start.
#958
i could use a little help
i want to get alloy rear hubs and steering knuckles and maybe alloy arms for my gtp2. i seen they have them for the ultra lx1 and since there almost the same i was thinking they may fit a gtp2 . can some one confirm thanks
http://cgi.ebay.com/OFNA-34002-Ultra...item4157d9271d
http://cgi.ebay.com/OFNA-34003-Ultra...item4157d9273c
i want to get alloy rear hubs and steering knuckles and maybe alloy arms for my gtp2. i seen they have them for the ultra lx1 and since there almost the same i was thinking they may fit a gtp2 . can some one confirm thanks
http://cgi.ebay.com/OFNA-34002-Ultra...item4157d9271d
http://cgi.ebay.com/OFNA-34003-Ultra...item4157d9273c
#959
Tech Adept
iTrader: (4)
Thanks the5, I figured that was the issue. I guess going off of what some people say isnt always correct. Im just going to order a new metal spur now anyway and a bigger MOD1 pinion too. I should have tried the 14t pinion that came with the kit but I got too antsy and wanted it to haul butt from the start.
#960
Tech Adept
i could use a little help
i want to get alloy rear hubs and steering knuckles and maybe alloy arms for my gtp2. i seen they have them for the ultra lx1 and since there almost the same i was thinking they may fit a gtp2 . can some one confirm thanks
http://cgi.ebay.com/OFNA-34002-Ultra...item4157d9271d
http://cgi.ebay.com/OFNA-34003-Ultra...item4157d9273c
i want to get alloy rear hubs and steering knuckles and maybe alloy arms for my gtp2. i seen they have them for the ultra lx1 and since there almost the same i was thinking they may fit a gtp2 . can some one confirm thanks
http://cgi.ebay.com/OFNA-34002-Ultra...item4157d9271d
http://cgi.ebay.com/OFNA-34003-Ultra...item4157d9273c
http://www.nitrohouse.com/p10939/REA...duct_info.html