RC10B4.1 FT/WC
#3886
Joined: Oct 2008
Posts: 7,374
From: Minnesota
#3888
Joined: Oct 2008
Posts: 7,374
From: Minnesota
#3890
Tech Adept
iTrader: (1)
Joined: Oct 2009
Posts: 118
my friend took some photos of the top and bottom of his car, I put my car next to his and I would say its about 3/16 longer than a stock b4 chassis, he took a 2"x1 1/2"x1/8" CF, 4 countersunk screws on each side and put some sort of glue on the bottom of the chassis to stick the 2 peices together.
#3891
Guys,
I did a search, but did not find much. I am thinking about switching from a ball diff in my FT B4.1 to a gear diff with silicone fluid. Is there a specific area/thread for this topic?
Or...can anyone recommend a starting point for a gear diff with silicone fluid on an indoor clay track?
Thanks for the help!
Jim
I did a search, but did not find much. I am thinking about switching from a ball diff in my FT B4.1 to a gear diff with silicone fluid. Is there a specific area/thread for this topic?
Or...can anyone recommend a starting point for a gear diff with silicone fluid on an indoor clay track?
Thanks for the help!
Jim
#3893
Guys,
I did a search, but did not find much. I am thinking about switching from a ball diff in my FT B4.1 to a gear diff with silicone fluid. Is there a specific area/thread for this topic?
Or...can anyone recommend a starting point for a gear diff with silicone fluid on an indoor clay track?
Thanks for the help!
Jim
I did a search, but did not find much. I am thinking about switching from a ball diff in my FT B4.1 to a gear diff with silicone fluid. Is there a specific area/thread for this topic?
Or...can anyone recommend a starting point for a gear diff with silicone fluid on an indoor clay track?
Thanks for the help!
Jim
#3894
Thoughts?
S/F
Jim
#3895
Just looking to try something different. There are a couple guys at SDRC running the gear diff that are more than fast with it, so I think I can make it work. I have one lying around and just wanted to tinker with it. I like the ball diff, but rebuilding it after every race weekend it getting to be a bit much.
Thoughts?
S/F
Jim
Thoughts?
S/F
Jim
#3897
Just looking to try something different. There are a couple guys at SDRC running the gear diff that are more than fast with it, so I think I can make it work. I have one lying around and just wanted to tinker with it. I like the ball diff, but rebuilding it after every race weekend it getting to be a bit much.
Thoughts?
S/F
Jim
Thoughts?
S/F
Jim
#3898



