I know how you feel. I started off with a RTR SC10 myself. Now the only thing that isn't FT on it is the blue servo saver bolt and the blue servo arm ring, although I have both in my pit hauler

I made sure I didn't make the same mistake when I got the buggy and did it right the first time around, which is what I'm planning on doing moving forward.

still screws in tho..... and ill try the ca thing thanks guys

Few pics of my T4.1



Took it to the track ran it for 15 mins took the big jump full speed did not go off it straight and well the hub carrier broke... opps...
I don't like the steering on it not very response it's like once it catches a line it just stays in that line I have to over steer to pull it out.

I would say you have something going on in your steering, sounds like either the linkage is binding somewhere, or the servo saver is seized up. If all seems well it may be time to replace the servo itself, as it may be having a hard time centering itself..

Painted by Kolor Koncepts

Looks good man..

Thanks man

looks good. punisher body or high flow.

OK, I'm gonna need set up help for this track. I haven't been there yet so I don't know, but this will be tough for the truck.

http://www.youtube.com/watch?v=ARgav9QUEOA

Also any help setting up the Tekin RS pro with a 8.5 with the Hotwire would be appreciated.

Very nice indeed.

Chico really does nice work.....

2nd lrp sxx fried, this time no reason, not wires touching everything fine... realiable huh... my luck....any help?

Sorry to hear, I haven't much luck there either, had two older versions, and one quit working, so I changed colors, and the problems seemed to go away..

Sorry to hear. Try a Tekin RS next?

Were any of the solder pads touching on the bottom AT ALL? That will do it..