works with MT4 only...

http://www.airtronics.net/index.php/...-receiver.html

Sup fellas..
I skimmed through the last 20+ pages but didnt see anything..

Is there anyway to re set the radi back to factory default??

How exactly are Intellect LiPo packs "cheap crap"? They are one of the biggest manufacturers of LiPo batteries & supply many companies, which simply rebadge their batteries. What makes them so crap? Why even write something like that if you have not a single qualifying statement or reason for saying something like that?

I've been using their NiMH packs for more than 7 years with not 1 single problem. I've also been using both their LiFe & LiPo packs for about 18months now, also without a single problem ever. Really sounds like "cheap crap" to me too.

Thanks again.

Thanks to everyone who replied.
Yes it is the low-profile im looking at ive read that only sanwa servos can be used in ssr mode with the 451R receiver i was not aware of this until after
purchase. (normally use savox no probs ever).
I run 1/10 on road and the power is fine it was the speed when used with
the 451R that i was checking on.
Im hoping to get more of an edge with the faster response time.

having a problem switching models . I have only had one model with one recever. now i want to add another model and recever but when i try to switch models it sez display model only. can someone help?

the sliding button on the front,slide it and hold then change the model and power after swichting it!

ya i got it right after i posted... lol thanks tho!!

Hi Guys,

In the RX-451R instructions, it says "do not use a receiver battery greater then 6.0v to power this receiver"

I have used LiFe in my past KO gear. Is LiFe (6.6v) receiver batteries ok to use?

Thanks,

it can be ised with life and 2 cell lipo direct

I am in need of serious help, i have a M11X and the subfolders are in C. (next to the model on the top it wont come out of C folders. Anybody got an idea how to help?

Okay i found out i need help getting it out of custom menu. Please help me find the steps. I have a manual and found it in there but it says to go to C-menu but since its in custom menu C-menu isnt there.

my mistake

Hey guys, does anyone no if a 2cell lipo 2000mah Losi pack will work in a m11x, I'm not talking about if the slide works, just if the actually battery being lipo directly being plugged in will be ok, I don't mind doing a lil hacking to make this work!!

M11x can take 2S lipo as mentioned in their manual. Just make sure it will fit in the battery compartment, use the right connector and *very important* observe the polarity before you it plug in.