57LikesThe Speed Passion Thread
03-17-2011 | 04:48 PM
#6766
you see to me that just doesn't make sense, " turn outs gonna be low so I'm not going", and because you don't go, well.... turn out is low. time for another excuse if you ask me. blame bush or obama or the economy just get a better excuse.
besides turn out for this carpet nats is just fine. I believe its darn near a sell out.
http://www.roarracing.org/national_r....php?raceid=14
besides turn out for this carpet nats is just fine. I believe its darn near a sell out.
http://www.roarracing.org/national_r....php?raceid=14
03-17-2011 | 06:05 PM
#6768
Tech Fanatic
Joined: Apr 2006
Posts: 893
Speed Passion Engineer
+1
hey fellas i just think why, no more updates from Speed Passion,
and Why Speed Passion Driver didn't know who is the Engineer.
it is important to know who is doing the development.
i have read that Mr.PAN is involved in the SpeedPassion
so i am saying that, Michael or Yannick at Hobbywing is the Engineer.
because Mr.Pan is from Hobbywing too.
funny thing is that, every last E-mail, since Shawn Palmer moved,
the denial of Speed Passion Engineer "Michael" they said is not.
Now, Hobbywing has Won the TITC, and it's make me more curios.
Who is Exactly our Loved SpeedPassion Engineer is ?
i guess it is very important to know more....
03-17-2011 | 06:21 PM
#6769
+1
hey fellas i just think why, no more updates from Speed Passion,
and Why Speed Passion Driver didn't know who is the Engineer.
it is important to know who is doing the development.
i have read that Mr.PAN is involved in the SpeedPassion
so i am saying that, Michael or Yannick at Hobbywing is the Engineer.
because Mr.Pan is from Hobbywing too.
funny thing is that, every last E-mail, since Shawn Palmer moved,
the denial of Speed Passion Engineer "Michael" they said is not.
Now, Hobbywing has Won the TITC, and it's make me more curios.
Who is Exactly our Loved SpeedPassion Engineer is ?
i guess it is very important to know more....
hey fellas i just think why, no more updates from Speed Passion,
and Why Speed Passion Driver didn't know who is the Engineer.
it is important to know who is doing the development.
i have read that Mr.PAN is involved in the SpeedPassion
so i am saying that, Michael or Yannick at Hobbywing is the Engineer.
because Mr.Pan is from Hobbywing too.
funny thing is that, every last E-mail, since Shawn Palmer moved,
the denial of Speed Passion Engineer "Michael" they said is not.
Now, Hobbywing has Won the TITC, and it's make me more curios.
Who is Exactly our Loved SpeedPassion Engineer is ?
i guess it is very important to know more....
03-18-2011 | 07:46 AM
#6770
Tech Master
iTrader: (12)
Joined: Jul 2006
Posts: 1,229
From: Bay City, TX
Hope y'all can help. Picked up a Gt 2.0 LPF speedo and Trinity Nemesis 17.5 motor from someone locally. Everything seems to be in good shape, but he didn't send teh power cap with it. Can't find it on the SP site. Anyone know where I can get one, or if not, what the specs are? I have a couple of Novak and LRP caps laying around, wondering if one will work. Was originally going to put this in my B4, but now thinking about drift car I got just to play with. Will this system work well in the drift car? Assume he's upgrade the software since he says it's already programmed with boost/turbo. I have the LCD programmer for my HW stuff, so I can change anything I need to. Thanks.
03-18-2011 | 08:39 AM
#6771
Hope y'all can help. Picked up a Gt 2.0 LPF speedo and Trinity Nemesis 17.5 motor from someone locally. Everything seems to be in good shape, but he didn't send teh power cap with it. Can't find it on the SP site. Anyone know where I can get one, or if not, what the specs are? I have a couple of Novak and LRP caps laying around, wondering if one will work. Was originally going to put this in my B4, but now thinking about drift car I got just to play with. Will this system work well in the drift car? Assume he's upgrade the software since he says it's already programmed with boost/turbo. I have the LCD programmer for my HW stuff, so I can change anything I need to. Thanks.
The caps from the Novak or LRP brushless ESC's should be fine. If you do a search in this thread, there is a link to the Caps which are being used for MOD as well.
03-18-2011 | 09:31 AM
#6772
Tech Champion
Joined: Oct 2007
Posts: 7,342
this probably has already been answered before but the programmer box that came with my GT V2.0 ESC only goes up to I think 10 settings (cant remember) but then the set up sheet has settings for up to 13 (cant remember that either). Whats needed to adjust for those extra settings?
http://www.speedpassion.net/en/produ...=SPLCD01&c=OPT
http://www.speedpassion.net/en/produ...02PROscb&c=ESC
(downloads tab)
For guidance, the brushless esc program software upgrade video (the last one I believe):
http://www.speedpassion.net/en/video.asp
03-18-2011 | 09:31 AM
#6773
Joined: Sep 2002
Posts: 9,295
From: Chicago Illinois USA
i am going to be running my GT2.0 for our 0Timing races here in NL is it ok to run the speedo without the Caps ?? if not will i be able to use a smaller cap as the standard ones are well .........HUGE 
also i have noticed that at ETS some of the quicker drivers (using Citrix and 13.5v3) have more power then the the "slower" drivers what are the tuning tricks for the SP v3 motor ????
cheeRS Phil
also i have noticed that at ETS some of the quicker drivers (using Citrix and 13.5v3) have more power then the the "slower" drivers what are the tuning tricks for the SP v3 motor ????
cheeRS Phil
I doubt it....just like TITC, ETS has offical seal on the motor when racing. However, no motor are created equal, there could be 1 faster then the other...but I am sure the gearing and other factors does make the different.
For sure, not the club spec ESC.
03-18-2011 | 09:34 AM
#6774
Joined: Sep 2002
Posts: 9,295
From: Chicago Illinois USA
this probably has already been answered before but the programmer box that came with my GT V2.0 ESC only goes up to I think 10 settings (cant remember) but then the set up sheet has settings for up to 13 (cant remember that either). Whats needed to adjust for those extra settings?
03-18-2011 | 09:36 AM
#6775
Joined: Sep 2002
Posts: 9,295
From: Chicago Illinois USA
i wanna use my SP GT2.0 ESC on my 12th scale with 1S battery, will be using a separate 2S Life battery for Rx/servo power.
my question is, do i need to disable the low voltage cut-off of the ESC? right now when i switch it ON with freshly charged 1S battery, the speedo beeps twice with 1-sec interval indicating low voltage.
t-i-a
my question is, do i need to disable the low voltage cut-off of the ESC? right now when i switch it ON with freshly charged 1S battery, the speedo beeps twice with 1-sec interval indicating low voltage.
t-i-a
03-18-2011 | 09:41 AM
#6776
Joined: Sep 2002
Posts: 9,295
From: Chicago Illinois USA
Hope y'all can help. Picked up a Gt 2.0 LPF speedo and Trinity Nemesis 17.5 motor from someone locally. Everything seems to be in good shape, but he didn't send teh power cap with it. Can't find it on the SP site. Anyone know where I can get one, or if not, what the specs are? I have a couple of Novak and LRP caps laying around, wondering if one will work. Was originally going to put this in my B4, but now thinking about drift car I got just to play with. Will this system work well in the drift car? Assume he's upgrade the software since he says it's already programmed with boost/turbo. I have the LCD programmer for my HW stuff, so I can change anything I need to. Thanks.
http://www.amazon.com/2200uf-Capacit...0466438&sr=8-4
03-18-2011 | 09:42 AM
#6777
Joined: Sep 2002
Posts: 9,295
From: Chicago Illinois USA
+1
hey fellas i just think why, no more updates from Speed Passion,
and Why Speed Passion Driver didn't know who is the Engineer.
it is important to know who is doing the development.
i have read that Mr.PAN is involved in the SpeedPassion
so i am saying that, Michael or Yannick at Hobbywing is the Engineer.
because Mr.Pan is from Hobbywing too.
funny thing is that, every last E-mail, since Shawn Palmer moved,
the denial of Speed Passion Engineer "Michael" they said is not.
Now, Hobbywing has Won the TITC, and it's make me more curios.
Who is Exactly our Loved SpeedPassion Engineer is ?
i guess it is very important to know more....
hey fellas i just think why, no more updates from Speed Passion,
and Why Speed Passion Driver didn't know who is the Engineer.
it is important to know who is doing the development.
i have read that Mr.PAN is involved in the SpeedPassion
so i am saying that, Michael or Yannick at Hobbywing is the Engineer.
because Mr.Pan is from Hobbywing too.
funny thing is that, every last E-mail, since Shawn Palmer moved,
the denial of Speed Passion Engineer "Michael" they said is not.
Now, Hobbywing has Won the TITC, and it's make me more curios.
Who is Exactly our Loved SpeedPassion Engineer is ?
i guess it is very important to know more....
03-18-2011 | 11:20 AM
#6778
Tech Master
iTrader: (12)
Joined: Jul 2006
Posts: 1,229
From: Bay City, TX
Thanks for the help on the power caps. The ones I have laying around are the small and large ones from the LRP QC2 Worlds kit, and the large Novak that was for the GT7 (I think, maybe GTX?). All from brushed speedos, and none of then have voltage or uf rating marked. About to do a little more digging.
