Can I use any sensor wire with any motor/esc? I just purchased an LRP sensor wire for a Tekin RS/Tekin Redline 13.5.

Yes you can, I recommend TQ sensor cables but your LRP will work fine as well.

http://www.tqracing.com/sensor.htm

Is there any advantage to the TQ sensor cable to the others out on the market? This is for a SC10 and an RC10B4.1.

Other than the fact that they're a quality product that come in a variety of lengths they are also very flexible but for your application your LRP cable should suit you just fine.

Hi Guys,

A friend sent me a link to this thread, so here it goes.

I think the greatest advantage in using our cables is the flexibility they provide. This is really important for pan cars as the cable can be routed in such a way (neatly/stealthly) that it will not tweak or bind the pod. You can't do this with other cables that are really stiff.

Other advantages are the use of silicone insulation for the wires and tube that won't easily burn if they get touched with a soldering iron and the secure crimping of the jacket and conductor. We also offer 10 different lengths from 50mm to 270mm to keep everyone happy.

I hope you get an opportunity to try some of our products in the future. Much success with your racing!

Ralph