Go Back  R/C Tech Forums > General Forums > Micro and Mini Scales
Team Associated SC18.... >

Team Associated SC18....

Community
Wiki Posts
Search

Team Associated SC18....

Thread Tools
 
Search this Thread
 
Old 12-21-2010 | 09:38 PM
  #511  
monkee's Avatar
Tech Fanatic
iTrader: (15)
 
Joined: Apr 2010
Posts: 860
From: cda, idaho
Default

what batteries do these sc18's take?
prefer something from hobbyking. thank you
monkee is offline  
Old 12-21-2010 | 10:20 PM
  #512  
Tech Elite
iTrader: (17)
 
Joined: Apr 2009
Posts: 3,055
Default

Rhino 1750mah fits easy, Turnigy 2200mah will squeeze in there.
burnineyes is offline  
Old 12-21-2010 | 11:11 PM
  #513  
monkee's Avatar
Tech Fanatic
iTrader: (15)
 
Joined: Apr 2010
Posts: 860
From: cda, idaho
Default

Originally Posted by burnineyes
Rhino 1750mah fits easy, Turnigy 2200mah will squeeze in there.
this battery?
how much runtime will that get with the stock motor/esc?

http://hobbyking.com/hobbyking/store...idProduct=7452

monkee is offline  
Old 12-22-2010 | 05:22 AM
  #514  
Tech Elite
iTrader: (17)
 
Joined: Apr 2009
Posts: 3,055
Default

30 minutes plus or minus a few for driving style and other factors. With a mild brushless system I can see 45+ minutes with these packs on track.
burnineyes is offline  
Old 12-22-2010 | 10:46 AM
  #515  
monkee's Avatar
Tech Fanatic
iTrader: (15)
 
Joined: Apr 2010
Posts: 860
From: cda, idaho
Default

Originally Posted by monkey-1
I put a Mamba Micro Pro/5400 in mine and it fit like it was meant to be in there:

I did have to move the receiver to the rear and put the controller behind the servo, but it all fit on the lower deck. Another guy at the LHS put a Tekin Mini Rage in his and he had to mount the controller on the top deck.

looking for some decent brushless options for the sc18 i just received.
is the castle the way to go?
i have to make an order from hobbyking.. but i didnt see any micro combos..
perhaps i just missed them.
thanks
monkee is offline  
Old 12-22-2010 | 11:06 AM
  #516  
Bobby Z's Avatar
Tech Master
iTrader: (4)
 
Joined: Sep 2001
Posts: 1,132
From: Niagara Falls, Ontario, Canada
Default

Originally Posted by monkee
looking for some decent brushless options for the sc18 i just received.
is the castle the way to go?
i have to make an order from hobbyking.. but i didnt see any micro combos..
perhaps i just missed them.
thanks
Check out www.hobbypartz.com for Hobbywing ESC and motor combos.

Either the 18 or 25 amp are fine and the 5200kv motor is plenty fast for this size car.
Bobby Z is offline  
Old 12-22-2010 | 01:07 PM
  #517  
Bobby Z's Avatar
Tech Master
iTrader: (4)
 
Joined: Sep 2001
Posts: 1,132
From: Niagara Falls, Ontario, Canada
Default

Originally Posted by monkee
what batteries do these sc18's take?
prefer something from hobbyking. thank you
Check out hard case Lipo from Promatch Racing: www.promatchracing.com

$19.99 for 1800mah and 35C

I ordered two of them this fall and they work great!
Bobby Z is offline  
Old 12-22-2010 | 03:13 PM
  #518  
Villjoe's Avatar
Tech Initiate
 
Joined: Dec 2010
Posts: 35
Default Replacement Aluminum Center Link

I have noticed that I, myself, and those I race with have had issues with the center link on the new Team Associated RC18B2 and T2 breaking frequently. A fellow racer and I have designed a replica piece made out of high grade, light weight, extra strength aluminum. The piece fits perfectly and it uses the stock Associated screws to install. Anyone interested can check it out and/or purchase it at:

The Average Joe's Production website.

www[dot]theaveragejoesproductions[dot]com
Villjoe is offline  
Old 12-23-2010 | 08:23 AM
  #519  
Chad Smith's Avatar
Tech Master
 
Joined: Sep 2010
Posts: 1,286
Default

Hey I just bought a sc18 to race on carpet. Will the stock servo work for a little while. Or should i upgrade to a hitec 65mg servo?

And what shocks are you guys running the sc18.
Chad Smith is offline  
Old 12-24-2010 | 06:26 AM
  #520  
Tech Adept
 
Joined: Mar 2007
Posts: 111
From: Va.
Default

Originally Posted by Chad Smith
Hey I just bought a sc18 to race on carpet. Will the stock servo work for a little while. Or should i upgrade to a hitec 65mg servo?

And what shocks are you guys running the sc18.
It will work, just not very well. mine wouldn't center right out of the box. I replaced it with a Savox...problem solved. A lot of people are using the FT shocks from an RC18T but i think the 3Racing ones would be better.
oldrcer is offline  
Old 12-24-2010 | 08:07 AM
  #521  
Chad Smith's Avatar
Tech Master
 
Joined: Sep 2010
Posts: 1,286
Default

Originally Posted by oldrcer
It will work, just not very well. mine wouldn't center right out of the box. I replaced it with a Savox...problem solved. A lot of people are using the FT shocks from an RC18T but i think the 3Racing ones would be better.
How about the tires will they work on carpet?

About the shocks, are they using the long shocks in the back and then short ones in the front?
Chad Smith is offline  
Old 12-24-2010 | 08:15 AM
  #522  
Chad Smith's Avatar
Tech Master
 
Joined: Sep 2010
Posts: 1,286
Default

Does anybody know of a good brushless Esc and Motor for the sc18. I know the novak is the best but dont feel like spending that type of money.I was thinking something from hobbyking?
Chad Smith is offline  
Old 12-24-2010 | 10:47 AM
  #523  
Tech Apprentice
 
Joined: Mar 2006
Posts: 58
Default

I use the ezrun speedo and it works fine. Has all the settings I need. I run it with a 4200 China Motor (no ezrun), 32 kmh, plenta of runtime.

nic
supersonic12 is offline  
Old 12-24-2010 | 11:11 AM
  #524  
Chad Smith's Avatar
Tech Master
 
Joined: Sep 2010
Posts: 1,286
Default

Originally Posted by supersonic12
I use the ezrun speedo and it works fine. Has all the settings I need. I run it with a 4200 China Motor (no ezrun), 32 kmh, plenta of runtime.

nic
Can you give me a link where you bought the motor and esc at
Chad Smith is offline  
Old 12-24-2010 | 12:20 PM
  #525  
Tech Apprentice
 
Joined: Mar 2006
Posts: 58
Default

ebay, Search for ezrun 1:18. nic
supersonic12 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.