Team Associated SC18....
#513
this battery?
how much runtime will that get with the stock motor/esc?
http://hobbyking.com/hobbyking/store...idProduct=7452
how much runtime will that get with the stock motor/esc?
http://hobbyking.com/hobbyking/store...idProduct=7452
#515
I put a Mamba Micro Pro/5400 in mine and it fit like it was meant to be in there:
I did have to move the receiver to the rear and put the controller behind the servo, but it all fit on the lower deck. Another guy at the LHS put a Tekin Mini Rage in his and he had to mount the controller on the top deck.
I did have to move the receiver to the rear and put the controller behind the servo, but it all fit on the lower deck. Another guy at the LHS put a Tekin Mini Rage in his and he had to mount the controller on the top deck.
looking for some decent brushless options for the sc18 i just received.
is the castle the way to go?
i have to make an order from hobbyking.. but i didnt see any micro combos..
perhaps i just missed them.
thanks
#516
Either the 18 or 25 amp are fine and the 5200kv motor is plenty fast for this size car.
#517
$19.99 for 1800mah and 35C
I ordered two of them this fall and they work great!
#518
I have noticed that I, myself, and those I race with have had issues with the center link on the new Team Associated RC18B2 and T2 breaking frequently. A fellow racer and I have designed a replica piece made out of high grade, light weight, extra strength aluminum. The piece fits perfectly and it uses the stock Associated screws to install. Anyone interested can check it out and/or purchase it at:
The Average Joe's Production website.
www[dot]theaveragejoesproductions[dot]com
The Average Joe's Production website.
www[dot]theaveragejoesproductions[dot]com
#520
Tech Adept
Joined: Mar 2007
Posts: 111
From: Va.
It will work, just not very well. mine wouldn't center right out of the box. I replaced it with a Savox...problem solved. A lot of people are using the FT shocks from an RC18T but i think the 3Racing ones would be better.
#521
About the shocks, are they using the long shocks in the back and then short ones in the front?
#524



