Tamiya mini cooper
Tech Elite
iTrader: (7)
Join Date: Jun 2002
Location: Melbourne, Australia. Home of rc-mini.net
Posts: 3,549
Trader Rating: 7 (100%+)
Interestingly enough, the reason Tim, myself and Tony P started rc-mini.net in the first place was because we were constantly being asked about our 'setups' and 'tricks' etc.
In the end it got too much, so we did the website so that it was all available on there.
I think the problem is that many people are looking for some universal quick/easy solution and it just doesn't work like that.
We publish everything that we do on our cars, no secrets at all (apart from Tims April Fool ones) and the biggest problem we have is that no-one believes us!
They've convinced we're holding stuff back....
In the end it got too much, so we did the website so that it was all available on there.
I think the problem is that many people are looking for some universal quick/easy solution and it just doesn't work like that.
We publish everything that we do on our cars, no secrets at all (apart from Tims April Fool ones) and the biggest problem we have is that no-one believes us!
They've convinced we're holding stuff back....
Tech Adept
Tamiya short springs too low!!
I spent hours reading this thread and one of the common top recommended mods appeared to be to put these springs on so i got some. I have put them on the standard friction shocks and the car is now about 1mm off of the floor! Surely this is too low? We run it indoors on carpet.
scoop,
On the friction shocks with the short springs fitted you need to use spacers to adjust the ride height. This will get you back up to 3-5mm front and rear. These should be a "c" clip type plastic spacer that come in different thickness and are easily added or subtracted to alter the ride height.
Calvin.
On the friction shocks with the short springs fitted you need to use spacers to adjust the ride height. This will get you back up to 3-5mm front and rear. These should be a "c" clip type plastic spacer that come in different thickness and are easily added or subtracted to alter the ride height.
Calvin.
Tech Adept
Calvin, thanks for your quick reply. Would you know which make and model i should get that will fit the mini shock?
Tech Master
iTrader: (26)
Coming front a lot of TC and now Wgt, the biggest trick I find to going fast is just driving the damn thing. It's very different and requires a different method of driving. All the mods in the world mean nothing if you can't get it in and out of the corner with both front tires digging. Practice, practice, and practice a little more.
scoop,
The plastic c clips come with the Tamiya super mini cva shocks PNo 50746. If you follow the attached link it should assist with building your shocks and overall MO3/MO5 setup. Same rules apply with regards to ride height and shock setup.
http://www.rc-mini.net/joomla/index....d=44&Itemid=60
Thanks to the guy's at rc mini net.
Later
Calvin.
The plastic c clips come with the Tamiya super mini cva shocks PNo 50746. If you follow the attached link it should assist with building your shocks and overall MO3/MO5 setup. Same rules apply with regards to ride height and shock setup.
http://www.rc-mini.net/joomla/index....d=44&Itemid=60
Thanks to the guy's at rc mini net.
Later
Calvin.
sportpak,
You are correct, practicing is the biggest thing with mini, however you do require a car that is working first before you can practice.
Later,
Calvin.
You are correct, practicing is the biggest thing with mini, however you do require a car that is working first before you can practice.
Later,
Calvin.
Tech Elite
Coming front a lot of TC and now Wgt, the biggest trick I find to going fast is just driving the damn thing. It's very different and requires a different method of driving. All the mods in the world mean nothing if you can't get it in and out of the corner with both front tires digging. Practice, practice, and practice a little more.
Generally, better advice might be to seek out someone like Calvin and get him to help you on your setup or even to have him drive it and get his input. By the way, glad you made it back Calvin. At my track, there are very few guys that won't give someone a hand and I'm sure this is true at most tracks.
Please don't take this the wrong way, but this practice, practice and more practice crap just gives me a pain. You're just one of too many who spout this drivel. Thank God that Kevin, Craig, Mark ,Devin, Micheal, Chuck, Brandon, Steve, Dennis and others at the track and Pms from Calvin, Ray K and others didn't just tell me to go practice with the pieces of junk I was trying to make go fast.
Sorry, nothing personal, but I'd just heard that line one time too many.
Has anyone had any luck setting up a standard M03M/L or M05 as an off road rally car ?
Sorry I have never tried mini in the off road scene.
Bob,
Its good to be back home and playing with my cars again. I sure don't miss where I was, although I do miss that special bond you make with your mates when you experience the same stuff.
I hope to pass on some more advice when I finish doing some testing.
Regards,
Calvin.
Bob,
Its good to be back home and playing with my cars again. I sure don't miss where I was, although I do miss that special bond you make with your mates when you experience the same stuff.
I hope to pass on some more advice when I finish doing some testing.
Regards,
Calvin.
Tech Elite
iTrader: (7)
Join Date: Jun 2002
Location: Melbourne, Australia. Home of rc-mini.net
Posts: 3,549
Trader Rating: 7 (100%+)
Tech Regular
iTrader: (1)
Are the new Tamiya offroad rally cars as reliable as the modded M-03's?