Nice, post pics!

http://www3.towerhobbies.com/cgi-bin...&P=IA&I=LXACEN

Tower has the RC10B4.1 FT in stock.

Ra when you run at west coast you run a short or med wheelbase

Got mine on Tuesday.

So far this has been the easiest RC10 I have ever built. Just ran my #34 reamer through the hinge pin holes and a slight trim of one of the caster blocks and the suspension was super free. And the new shocks are BUTTER!!

Thinking about getting a b4.1 but the deciding factor is going to be weather or not the new shocks leak or not. Any feedback on the scocks would be great!

I have 3 race days and 2 practice days on the new shocks on my SC10 and T4 and no signs of leaking at all. The only gripe I have about them is that if you are running on a very loomy outdoor track the oil gets dirty a lot faster as you are picking up a lot of dirt on the shock shafts and getting the seals gritty but still no leaks.

I know you run the front arms level,do you run the arms or cvd level on the rear?also running indoor high bite clay,you guys run med or short wheel base?

Run the Bones level in the rear. I would try medium wheelbase to start if it has really high traction.

On the T4 run the cvd's level. Med wheelbase 99% of the time.

Also on the shock limiters,what washers you guys using?

part# 4187. .030 plastic washer

Thanks ae

got my b4.1 today very nice

I thought you were going to get a TQ car???