M11 lipo?
#1
I am trying to get a lipo for my m11, i have seen ppl using the 2S 7.4v or 3S 11.1V lipo, my question is.... would it be too much of Voltage if using 11.1v or would be it not enough of voltage if using the 7.4v, cuz currently i have been using 8 cells of 1.2v dry cell. My other question is if i chose to use 11.1v, do I care about the discharge rate like 10C or 15C or 20C? please advise. Thanks.
#2
It depends on what M11 you have. The standard M11 accepts a 3 cell lipo and the M11x accepts a 2 cell pack.
I use this pack in my M11. The charge holds for about a month of racing two time a week. Common sense rc also sells a pack for the M11 but it seems they are out of stock.
http://www.amainhobbies.com/product_...onics-M11-MX-3
I use this pack in my M11. The charge holds for about a month of racing two time a week. Common sense rc also sells a pack for the M11 but it seems they are out of stock.
http://www.amainhobbies.com/product_...onics-M11-MX-3
#3
It depends on what M11 you have. The standard M11 accepts a 3 cell lipo and the M11x accepts a 2 cell pack.
I use this pack in my M11. The charge holds for about a month of racing two time a week. Common sense rc also sells a pack for the M11 but it seems they are out of stock.
http://www.amainhobbies.com/product_...onics-M11-MX-3
I use this pack in my M11. The charge holds for about a month of racing two time a week. Common sense rc also sells a pack for the M11 but it seems they are out of stock.
http://www.amainhobbies.com/product_...onics-M11-MX-3
#6
#8
how about the discharge rate like the 20C, 15C, or 10C? Do i need to care about it? Can I use 20C lipo for it? will it mass up the tx? Thanks.
#9
I'd suggest life, i'm a dolt and i leave my radio on all the time so far i've run my life down to 2 volts (for the PACK) like three or 4 times and it has been fine afterwards. I did it once w/ a protek and it puffed.
#10
Discharge rate doesn't matter, just be sure to remember you can't use your regular xmitter charger with it.
I'd suggest life, i'm a dolt and i leave my radio on all the time so far i've run my life down to 2 volts (for the PACK) like three or 4 times and it has been fine afterwards. I did it once w/ a protek and it puffed.
I'd suggest life, i'm a dolt and i leave my radio on all the time so far i've run my life down to 2 volts (for the PACK) like three or 4 times and it has been fine afterwards. I did it once w/ a protek and it puffed.
#12
I am trying to get a lipo for my m11, i have seen ppl using the 2S 7.4v or 3S 11.1V lipo, my question is.... would it be too much of Voltage if using 11.1v or would be it not enough of voltage if using the 7.4v, cuz currently i have been using 8 cells of 1.2v dry cell. My other question is if i chose to use 11.1v, do I care about the discharge rate like 10C or 15C or 20C? please advise. Thanks.
#14
if you are getting the m11x dont get a LiFe battery, my self and a few other guys at my local track have being have problems with the 6.6v LiFe batterys in the m11x. becouse the low battery sensor or what ever its called goes off at 6.7v on the radio. and it says in the manual that if left in the low battery zone it could result in a loss of control.
#15



