Crawler esc questions
03-04-2010 | 06:56 PM
#1
Thread Starter
Tech Addict
iTrader: (8)
Joined: Feb 2010
Posts: 525
From: Los Angeles, California, USA
Crawler esc questions
#1: Does it have to be an esc MEANT for crawling?
#2: Whats a good one for under $50ish that has a 6a BEC
#3: What a good one under $100ish that has a 6a BEC
#4: would a Micro Mamba burn up if used with a 45t 540 motor?
#5: whats the BEST overall esc to get for crawling
#2: Whats a good one for under $50ish that has a 6a BEC
#3: What a good one under $100ish that has a 6a BEC
#4: would a Micro Mamba burn up if used with a 45t 540 motor?
#5: whats the BEST overall esc to get for crawling
03-09-2010 | 01:59 PM
#2
if you don't need drag brake, then it doens't have to be a "crawling" esc. look into the castle creations sidewinder. around $70, fully programable though your pc (with castle link), handles 3s lipo. never used the built in bec, but i think it is 6v/3a.
03-09-2010 | 03:53 PM
#3
Company Representative
Joined: Jun 2005
Posts: 2,891
From: SoCal
#1: Does it have to be an esc MEANT for crawling?
#2: Whats a good one for under $50ish that has a 6a BEC
#3: What a good one under $100ish that has a 6a BEC
#4: would a Micro Mamba burn up if used with a 45t 540 motor?
#5: whats the BEST overall esc to get for crawling
#2: Whats a good one for under $50ish that has a 6a BEC
#3: What a good one under $100ish that has a 6a BEC
#4: would a Micro Mamba burn up if used with a 45t 540 motor?
#5: whats the BEST overall esc to get for crawling
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
