Got two shims removed and a p4, 20% byrons race fuel, see if I can get it running tonight

I wouldnt jump to 2 shims removed quite yet....start with 1,

I agree with Max.
Small changes.

Thx for the imput, off to the track!!

I figured it out, plug was too cold, bottom was too lean, idle gap too small. The engine ran all night no flammage, power is great, didnt time fuel , but it was around 8 or 9 mins. So far great engine

how many shims did you run ?

Hopefully only one, I think they measure between 0.21 and 0.23

they are coming with 4 of those from factory...

Two thick shims, lets see how it runs this sat. I will be running this bad boy for 2010 season, Thanks Ofna!!

Hey Easy, how's the weather in Arizona??

71 degrees today in AZ

Man you guys have it made!! 25 degrees!! Here in the tri state area.

We run year round, its fun when its 100 degrees and no sun

You think it is hard to tune when its cold try to tune when it's a 120 degrees in AZ with 0% humidity and 0 water grains per pound of air and 0 oxygen, its like tuning on the moon

WOW!!!