R/C Stuff Selling
#6017
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Micro heli Dragon Fly
Hoovered less them 10 times, no time to learn & collecting dust.
- standard package
- 2 x like new futaba servos
- 1 x like new micro gyro
- no rx & tx
All for $200
Interested please PM me
Hoovered less them 10 times, no time to learn & collecting dust.
- standard package
- 2 x like new futaba servos
- 1 x like new micro gyro
- no rx & tx
All for $200
Interested please PM me
![Wink](https://www.rctech.net/forum/classic_images/smilies/wink.gif)
![zonerx is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#6020
Tech Addict
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Brand new battery for sale:-
2/3A ( receiver pack size ) 1000mah - S$ 1.50 each
Stick Pack 1100mah - S$1.90 each
PM if interested
2/3A ( receiver pack size ) 1000mah - S$ 1.50 each
Stick Pack 1100mah - S$1.90 each
PM if interested
![](http://www.daddyhobby.com/gallery/batt.jpg)
![HZM is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#6021
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Tamiya Baja King 4WD
Ran twice at WL track but burn my esc on second run, keep in box since then
- TL-01B chassis
- speed tune gear
- carbon shaft for gearbox
- topcad alum rear shocks, front still stock friction shocks
- not used stock motor & MSC
- no electronics
All for $130 or $170 with Yokomo S-pro 11T2W mw mod motor still in good condition.
interested pls PM me
sorry this one no picture.
Ran twice at WL track but burn my esc on second run, keep in box since then
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
- TL-01B chassis
- speed tune gear
- carbon shaft for gearbox
- topcad alum rear shocks, front still stock friction shocks
- not used stock motor & MSC
- no electronics
All for $130 or $170 with Yokomo S-pro 11T2W mw mod motor still in good condition.
interested pls PM me
![Wink](https://www.rctech.net/forum/classic_images/smilies/wink.gif)
sorry this one no picture.
![zonerx is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#6023
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
New (Never Run) 4.0mm SSG Carbon Fiber Lower Chassis Plate for X-Ray T1/T1R/EVO2 1/10 Touring Cars. Chassis is made by XtremeRacing USA.
S$130. Please PM or SMS 98169007.
Note : T1 Raycer (T1R) owners will require PART # 30 2551 from X-RAY (servo saver plastic cover – eccentric(2))
Top
Close-up
Bottom
S$130. Please PM or SMS 98169007.
Note : T1 Raycer (T1R) owners will require PART # 30 2551 from X-RAY (servo saver plastic cover – eccentric(2))
Top
Close-up
Bottom
Last edited by raygun; 12-22-2003 at 06:08 AM.
![raygun is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#6024
![Exclamation](https://www.rctech.net/forum/images/icons/icon4.gif)
Urgenly Selling Brand Sanwa M8
with 2x VR servos.
$400
any inquiries call Han Solo at 91445144
please do not sms!!!
SOLD!!!!!
with 2x VR servos.
$400
any inquiries call Han Solo at 91445144
please do not sms!!!
SOLD!!!!!
Last edited by Han Solo; 12-29-2003 at 05:08 AM.
![Han Solo is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#6025
Tech Apprentice
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
1- Super Ten with OS12CV, 2 speed, tuned pipe, full bearings, lots of tyres and some spares. Everything as shown:
2- Tamiya F103 with aluminum heatsink motor mount, Futaba S148 steering servo, FRP upperdeck and some spares and NIP foam tyre. As shown below but without electronics:
Quote me a resonable price at [email protected] Pictures available at : http://www.rcsites.net/munch/stufforsale.html
3- Hudy 1/8 setup board 340 x 540MM. Brand NEW never been used before still in plastic wrap that it came with. $40
Pls E-mail or PM me,
Thanks!
![](http://www.rcsites.net/munch/images/s10-full-set.jpg)
2- Tamiya F103 with aluminum heatsink motor mount, Futaba S148 steering servo, FRP upperdeck and some spares and NIP foam tyre. As shown below but without electronics:
![](http://www.rcsites.net/munch/images/f1full-set-small.jpg)
Quote me a resonable price at [email protected] Pictures available at : http://www.rcsites.net/munch/stufforsale.html
3- Hudy 1/8 setup board 340 x 540MM. Brand NEW never been used before still in plastic wrap that it came with. $40
Pls E-mail or PM me,
Thanks!
![Fit is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#6027
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Updated on 23/12/03
01 x Sanwa Super ERG ZR (Hi-torque steering)
01 x Hitec 625MG (throttle)
01 x GPM chassis (Blue, 4.5mm thick) (Quite new)
01 x Five Star carbon rear shock stay (Quite new)
01 x OS Max 12CV (bump start with FORM cooling head))
02 x Stabilizer set (front & rear)
01 x Kyosho 2 speed
01 x set of rear wheel extension kit (for using 30mm sponge tires)
01 x Square pipe (with Kyosho original header)
01 x extra set of V1S suspension (4 pcs)
01 x set of Hobao tires, rims & medium inserts (Quite new)
01 x used Protoform cover (Astra)
Differential been refilled with new 30k (F) & 5k (R) silicone oil.
Shocks are rebuilt with new 60wt silicone oil.
Selling at S$333 (Neg). Just need a controller set & reciever battery.
PM me if interested.
01 x Sanwa Super ERG ZR (Hi-torque steering)
01 x Hitec 625MG (throttle)
01 x GPM chassis (Blue, 4.5mm thick) (Quite new)
01 x Five Star carbon rear shock stay (Quite new)
01 x OS Max 12CV (bump start with FORM cooling head))
02 x Stabilizer set (front & rear)
01 x Kyosho 2 speed
01 x set of rear wheel extension kit (for using 30mm sponge tires)
01 x Square pipe (with Kyosho original header)
01 x extra set of V1S suspension (4 pcs)
01 x set of Hobao tires, rims & medium inserts (Quite new)
01 x used Protoform cover (Astra)
Differential been refilled with new 30k (F) & 5k (R) silicone oil.
Shocks are rebuilt with new 60wt silicone oil.
Selling at S$333 (Neg). Just need a controller set & reciever battery.
PM me if interested.
![Nodding](https://www.rctech.net/forum/classic_images/smilies/nod.gif)
![Vifer is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#6028
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
1 Futaba MJ T2PHKA
1 Futaba FP-R122JE 2ch AM receiver (AM 27mhz Module)
1 Futaba S3003 Servo
Comes with box & manual.
Used twice, still in tip top condition.
Interested buyer pls sms me @ 90945312.
Thanks for viewing.
1 Futaba FP-R122JE 2ch AM receiver (AM 27mhz Module)
1 Futaba S3003 Servo
Comes with box & manual.
Used twice, still in tip top condition.
Interested buyer pls sms me @ 90945312.
Thanks for viewing.
![plugnplay is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#6029
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
sellin a ta04 with some hop ups.(sadle pack chasis, frp upper deck, spur adapter or something.....extra spur gear and new bumper) 70
![BRANDED is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#6030
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
1 set of Novak SS5800 Brushless system (together with esc) to let go.
Ran less then 20 pack on it and use in M03 and mr4tc only.
with box and original package
$300 nett. *SOLD*
********************************************
Tamiya M03L - Mini Cooper
- with M04 chassis parts to convert M03 to M04
- 1 x pack (4) new xpress wheels set with tires
- 1 x pack (4) used xpress wheels set with tires
- 1 x frewer bashing shell
- full bearings and all stock parts
- no electronic & motor
all for $130
*********************************************
4 x topcad alum shocks - used once only
$30 *SOLD*
*********************************************
4 x tamiya rally block tires with yokomo disc wheel & insert
used once only
$35
*********************************************
Tamiya M03L Mini Cooper clear body shell with decal and windows mask.
$35
*********************************************
interested pls feel free to PM me
Ran less then 20 pack on it and use in M03 and mr4tc only.
with box and original package
$300 nett. *SOLD*
********************************************
Tamiya M03L - Mini Cooper
- with M04 chassis parts to convert M03 to M04
- 1 x pack (4) new xpress wheels set with tires
- 1 x pack (4) used xpress wheels set with tires
- 1 x frewer bashing shell
- full bearings and all stock parts
- no electronic & motor
all for $130
*********************************************
4 x topcad alum shocks - used once only
$30 *SOLD*
*********************************************
4 x tamiya rally block tires with yokomo disc wheel & insert
used once only
$35
*********************************************
Tamiya M03L Mini Cooper clear body shell with decal and windows mask.
$35
*********************************************
interested pls feel free to PM me
![Wink](https://www.rctech.net/forum/classic_images/smilies/wink.gif)
Last edited by zonerx; 12-25-2003 at 10:59 PM.
![zonerx is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)