Hi,

Yesterday during the last race in my local track, after a few practice laps I found that my transmitter (FUTABA 3PM 2.4GHz) shows low battery warning.
When I changed the batteries I found that link transmitter/receiver has been lost.
After many attempts to restore the link I decided to present my problem...

1. Turn on receiver (receiver steady RED)
2. Turn on transmitter (receiver blinks GREEN)
3. Push link button (receiver blinks RED and then blinks GREEN again)

According to manual when receiver blinks GREEN is detecting transmitter signal, but I can't understand why the link can't be reestablished.!!

Thanks for your help

please some help...
what can i do???

thanks

simple write on futaba

the manual says to not operate below 9v. that said there isnt anything in the manual to help with your problem but the info was good to know( just changed my batteries) contact futaba theyll help you with it.

Try this:
1. Turn on receiver (receiver steady RED)
2. Push button until receiver blinks RED
3. Turn on transmitter (receiver should be steady GREEN)

I charge batteries and try with the button, but can't reestablish transmitter/receiver link.

please some help!!