mrc 977 pro
#16
Tech Master
iTrader: (32)
Joined: Apr 2003
Posts: 1,141
Here's the truth about the 977. It charges lipos with a CC routine unlike most cc/cv routines. That's it, the volt reading is something else.
The graphs are a bit shakey , but the first is the CC and the second is a normal cc/cv.
The graphs are a bit shakey , but the first is the CC and the second is a normal cc/cv.
#18
Joined: Nov 2008
Posts: 15,743
From: RIP 'Chopper', 4/18/13 miss you bud:(
I have a 989 and it's a POS compared to my Hyperion.
No offense, like I said I just don't get it..... a 501x is like >$500
#19
Tech Fanatic
Joined: Jul 2006
Posts: 794
From: Brooklyn, New York
I plugged in the DC Power-Supply in the wall power outlet without plugging it in the charger. Then I smelled something burning coming from the power supply.
Was that a wrong move?
Was that a wrong move?
Last edited by GuyIsDamGood; 10-05-2016 at 07:56 PM.
#20
Tech Fanatic
Joined: Jul 2006
Posts: 794
From: Brooklyn, New York
I replaced the MRC 977 charger and power supply with the Graupner Polaron charging system(EX-1400 Charger and 2012 Power Supply).
It cost a few dollars; but it's a better charger.
It cost a few dollars; but it's a better charger.
Last edited by GuyIsDamGood; 12-04-2016 at 04:29 AM.
#21
Tech Fanatic
Joined: Jul 2006
Posts: 794
From: Brooklyn, New York
The Power Supply that came with the 977 Charger totally smoked-out yesterday.
First the charger and power supply started making clicking noises. So I unplugged then replugged the main power cord from the outlet. Then a fizzing noise and smoke started coming from the power supply.
Is there a better power supply can I use with the MRC 977 Charger? (it's for my kids batteries)
First the charger and power supply started making clicking noises. So I unplugged then replugged the main power cord from the outlet. Then a fizzing noise and smoke started coming from the power supply.
Is there a better power supply can I use with the MRC 977 Charger? (it's for my kids batteries)
Last edited by GuyIsDamGood; 01-07-2017 at 05:10 AM.




