Hyperion balance connector == ??
03-02-2009 | 12:31 PM
#1
Thread Starter
Tech Rookie
Joined: Mar 2009
Posts: 3
Hyperion balance connector == ??
I have a Bantam E-Station BC6 and the balance board that came with it isn't going to work with the hyperion connector on my new maxamps pack.
A quick look on amainhobbies came up with none of the boards they have mentioning hyperion/method/apache.
Google returns a few sites that mention polyquest/hyperion.
Would I be good with a polyquest balance board with the hyperion connector?
A quick look on amainhobbies came up with none of the boards they have mentioning hyperion/method/apache.
Google returns a few sites that mention polyquest/hyperion.
Would I be good with a polyquest balance board with the hyperion connector?
03-03-2009 | 06:03 AM
#2
Tech Master
Joined: Jun 2007
Posts: 1,061
From: Nine Mile Falls, WA
I have a Bantam E-Station BC6 and the balance board that came with it isn't going to work with the hyperion connector on my new maxamps pack.
A quick look on amainhobbies came up with none of the boards they have mentioning hyperion/method/apache.
Google returns a few sites that mention polyquest/hyperion.
Would I be good with a polyquest balance board with the hyperion connector?
A quick look on amainhobbies came up with none of the boards they have mentioning hyperion/method/apache.
Google returns a few sites that mention polyquest/hyperion.
Would I be good with a polyquest balance board with the hyperion connector?
Jason
04-03-2009 | 08:52 PM
#3
Tech Rookie
Joined: Apr 2009
Posts: 9
From: San Diego
Lipo Balance connetor
Hi,
I hope this isn't too off topic but I just bought a Hyperion 0606i and I have Reedy 5100 Lipo.
But the balance tab on the Reedy doesn't fit the balance board that came with the charger. I have done some searching and I think that the Reedy batt uses an "Align" balance connector. So I think i need the XH type connector, is that right?
At the moment I am just using a blinky to balance my pack, is that not as good as the balance i will get from the chargers balance?
- JP
I hope this isn't too off topic but I just bought a Hyperion 0606i and I have Reedy 5100 Lipo.
But the balance tab on the Reedy doesn't fit the balance board that came with the charger. I have done some searching and I think that the Reedy batt uses an "Align" balance connector. So I think i need the XH type connector, is that right?
At the moment I am just using a blinky to balance my pack, is that not as good as the balance i will get from the chargers balance?
- JP
04-04-2009 | 04:50 AM
#4
Tech Master
Joined: Jun 2007
Posts: 1,061
From: Nine Mile Falls, WA
Yes Reedy uses the Align Style (XH) balance tap. Just buy this adapter board:
http://www.maxamps.com/proddetail.ph...-ALIGN&cat=212
Jason
http://www.maxamps.com/proddetail.ph...-ALIGN&cat=212
Jason
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
