hardhead

iTrader: (97)

I have a new mach 427 with the spin start back plate my motor want seat down far enough for the bump box wheel to hit the fly wheel. Who makes a plate to do away with the spin start. thanks in advance

Unsober1

iTrader: (5)

These Mach motors are one of my favorite budget motors. And If you get then slightly modded, it makes this motor more linear / drivable.

Heres a link for ya !!!

http://www.amainhobbies.com/product_...oducts_id/4331

jrwoodchuck

if you have the eight, you will need to get stock engine mounts for the pro kit. i wouldn't be suprised if there arent guys in here that have them lying around after going to the one peice engine mount. i don't run losi anymore or i would have had some for ya!

Unsober1

iTrader: (5)

If you are needing these motor mounts from the Pro kit, I know I have them laying around. I will sell them to you basically shipping cost


+100 bucks.....J/K

hardhead

iTrader: (97)

ok thanks unsober thats what i wanted.


jrwoodchuck i do have the 8T, the problem is im a dumbass and i dont know what the prokit is and the 427 has the motor mounts on it that came on it. i also have the quick change motor mount is that what your calling the 1 peice if so is that what i need to use? FYI this is a ebay truck that has a new never run motor in it that i bought and im putting it together and its also my 1st losi

jrwoodchuck

in the truggy they call it the race roller. i'm guessing you have the rtr. does it have the silver chassis or the grey annodized chassis?

hardhead

iTrader: (97)

well it kinda looks grayish gold

hardhead

iTrader: (97)

its definetly anodized kinda even looks green









well this help

jrwoodchuck

my guess is you have the race roller. here are what the mounts should look like.

http://www.amainhobbies.com/product_...oducts_id/9001

jrwoodchuck

yup, race roller.

hardhead

iTrader: (97)

it came with 6 of those and 1 thats big and sqaure

jrwoodchuck

the big and square is the one that everybody wants, thats a one peice. here is what it should look like. i prefer the one peice as most if not all racers run.

http://www.amainhobbies.com/product_...ducts_id/16844

hardhead

iTrader: (97)

so i need to use the quick change and the sport works backplate and i should be able to use my bumpbox? And the rtr has the silver chassis. I see said the blind man
haha we posted at the same time

jrwoodchuck

lol, yea! make sure you have the two smaller pieces that are in the a-main post. nice thing about that mount is you can run losi and mugen clutches.

hardhead

iTrader: (97)

Man i feel way smarterthanks for helping a newb !!!