TAMIYA 11th ASIA CUP QUALIFYING (SINGAPORE) CHAMPIONSHIP 2008
#107
Tech Master
Joined: Aug 2001
Posts: 1,152
I remembered I used deans for the local Tamiya race. But during the TAC, the stock tamiya plugs are used.
I think best to keep stock. At the amps that the silver can is drawing, you'll won't feel a difference if you used deans or tamiya.
Save the $$ for more tires and practice times.
I think best to keep stock. At the amps that the silver can is drawing, you'll won't feel a difference if you used deans or tamiya.

Save the $$ for more tires and practice times.
#108
Tech Adept
iTrader: (1)
Joined: Jul 2007
Posts: 127
From: Singapore Zoo
I remembered I used deans for the local Tamiya race. But during the TAC, the stock tamiya plugs are used.
I think best to keep stock. At the amps that the silver can is drawing, you'll won't feel a difference if you used deans or tamiya.
Save the $$ for more tires and practice times.
I think best to keep stock. At the amps that the silver can is drawing, you'll won't feel a difference if you used deans or tamiya.

Save the $$ for more tires and practice times.

so i can use deans for the race, coz all my batt is using deans
#109
Hello Everyone,
Happy New Year !!!
Hope everyone have a good celebration during the festive period.
Here it is , the finalised general information and race regulations for TAC2008 qualifying in Singapore.
Should you have any questions,please feeel free to post here or contact us.
Cheers!!
Happy New Year !!!
Hope everyone have a good celebration during the festive period.
Here it is , the finalised general information and race regulations for TAC2008 qualifying in Singapore.
Should you have any questions,please feeel free to post here or contact us.
Cheers!!
#112
The race this Sunday is a Pre-TAC Tune-Up race. The venue is Track RCI at Racecraft Infinity, address is 60 Jalan Penjara (which is off Margaret Drive). The track is located within Queens Town Club. Check out www.racecraftrc.com. See map attached.
Enjoy the race !
#113
Hi all,
I'm from Malaysia and planning a family trip to Singapore sometime in March. Would be great to see the first round of the race at Far East Plaza on March 8-9, and practice some RC photography.
I noticed that on the schedule posted earlier, some rounds are on just one day while others are over the whole weekend. Are different classes being held on the two days of March 8 and 9?
Oh ya, btw, March 8 is voting day for us in Malaysia, so see ya on the 9th, most likely. Happy Chinese New Year and Good luck to all racers.
Thanks.
Sim
I'm from Malaysia and planning a family trip to Singapore sometime in March. Would be great to see the first round of the race at Far East Plaza on March 8-9, and practice some RC photography.
I noticed that on the schedule posted earlier, some rounds are on just one day while others are over the whole weekend. Are different classes being held on the two days of March 8 and 9?
Oh ya, btw, March 8 is voting day for us in Malaysia, so see ya on the 9th, most likely. Happy Chinese New Year and Good luck to all racers.
Thanks.
Sim
#118
yea i did the stock class too. very tired from raceing 2 classes back to back.
here is a vid
http://www.youtube.com/watch?v=Vv_sj7MapZY
here is a vid
http://www.youtube.com/watch?v=Vv_sj7MapZY


