Tamiya TRF416 / TRF416WE / TRF416X
#436
#438
Tech Apprentice
No it doesn`t come with the aluminium uprights.
hard plastic ones are provided with 10x5 bearings
also the new wheelaxles are a bit longer.....
and we can`t use the front bridge suspension. for now
@ rc-market
your request.....
greetz
C.
hard plastic ones are provided with 10x5 bearings
also the new wheelaxles are a bit longer.....
and we can`t use the front bridge suspension. for now
@ rc-market
your request.....
greetz
C.
#439
Tech Apprentice
syndrome
53599 for the ball connector nut 2xbags about 20 pieces
53600 for the ball connector 1xbag about 10 pieces
53599 for the ball connector nut 2xbags about 20 pieces
53600 for the ball connector 1xbag about 10 pieces
#440
so where did u get the blue rear uprights then>
#441
Tech Champion
iTrader: (4)
Hey Gizmo,
Just a quick pointer, and not sure if you have done this... but if your using the flourine ball connectors, make sure you lose 1mm worth of shims under them, if your trying to compare it too the blue hex headed ones... They are 1mm taller, so that'll affect your Roll centre height (on the camber links) and the ackerman positions (on the steering).
Car(s) look really good, not long till I get mine now
Cheers
Ed
Just a quick pointer, and not sure if you have done this... but if your using the flourine ball connectors, make sure you lose 1mm worth of shims under them, if your trying to compare it too the blue hex headed ones... They are 1mm taller, so that'll affect your Roll centre height (on the camber links) and the ackerman positions (on the steering).
Car(s) look really good, not long till I get mine now
Cheers
Ed
#442
Hey Gizmo,
Just a quick pointer, and not sure if you have done this... but if your using the flourine ball connectors, make sure you lose 1mm worth of shims under them, if your trying to compare it too the blue hex headed ones... They are 1mm taller, so that'll affect your Roll centre height (on the camber links) and the ackerman positions (on the steering).
Car(s) look really good, not long till I get mine now
Cheers
Ed
Just a quick pointer, and not sure if you have done this... but if your using the flourine ball connectors, make sure you lose 1mm worth of shims under them, if your trying to compare it too the blue hex headed ones... They are 1mm taller, so that'll affect your Roll centre height (on the camber links) and the ackerman positions (on the steering).
Car(s) look really good, not long till I get mine now
Cheers
Ed
#443
Tech Apprentice
@ vicko. they are normale st. HO uprights, ( with st.lw axles
@ Ed. I did know that,I know what Iam doing. but thanks for the pointer anyway.
perhaps somebody did not no this.
greetings
C.
@ Ed. I did know that,I know what Iam doing. but thanks for the pointer anyway.
perhaps somebody did not no this.
greetings
C.
#447
#449
Tech Adept
does it come with front aluminium CVD's?
Does someone have the ref for front steel bones?
Does someone have the ref for front steel bones?
#450
Hi,
very nice pics!
The rear Belt seems to have 174teeth. How many has the front belt? Soon there will be available Heavy Duty one by RCDevil.
Now I am waiting for the manual as PDF. So I can prepare the Square screw sets (Titanium/Aluminum).
very nice pics!
The rear Belt seems to have 174teeth. How many has the front belt? Soon there will be available Heavy Duty one by RCDevil.
Now I am waiting for the manual as PDF. So I can prepare the Square screw sets (Titanium/Aluminum).