Serpent 720
#1636
Tech Apprentice
hey, can i ask wot effects would you see tightening, loosening belts on front, back and centre
thanks
thanks
#1637
Tech Master
iTrader: (2)
Originally Posted by Team Kamikaze
Serpent made a tool to make the adjustment of the centax clutch easier, with this tool you can adjust the tension of the spring externally, part number for the tool is #909598, but a tool to make building the centax clutch easier, I don't think there is one.
http://www.mytsn.com/products/desc.asp?prid=4201
This helps with setting clutch gap.
#1638
Tech Adept
Serpent USA included a hard clutch spring with a sheet recommending various setting depending on the engine being used in the box of my 720. The sheet shows an END PLAY setting of between 0.4mm and 0.6mm, depending on the engine. This seems to me to be excessive as most other documentation recommends a setting where there is barely any movement. Wondering if these numbers are correct or are they maybe off by a decimal point.
#1639
loose belts are faster but have a larger risk of slipping, slipping will lead to failure. so often you run a loose belt for quals and tighten them a notch for mains.
#1640
New stuff I saw today from www.mytsn.com ! Pretty cool stuff .
Rear body mount support
Floating body mount for lolas
Rear body mount support
Floating body mount for lolas
#1641
Originally Posted by Jo Gutierrez
New stuff I saw today from www.mytsn.com ! Pretty cool stuff .
#1643
Originally Posted by nigelnuggets
and theres my xmas present.
#1644
That floating body mount is really tempting.
#1645
Pro centax II? haha i didnt know that fit the 705. cool!
#1646
Originally Posted by Sow&Steady
And mine ... together with the Pro Centax II set I think. Maybe it won't fit the 720 but I'm tempted to resurrect the old 705!
#1647
Originally Posted by M7H
If santa accidentally gives the centax clutch set to you, then send it to me my friend.....
#1648
Tech Adept
Has anyone noticed that on the caberlink mount they have given you more mounting holes for the link?
#1649
Tech Regular
Originally Posted by Nick Simpson
Has anyone noticed that on the caberlink mount they have given you more mounting holes for the link?
Yeah I did... On mytsn there's a picture of all the parts.. more clear there... what i'm wondering is the bolt in stead of the normal hex screw...
#1650