Drift_Buggy

iTrader: (22)

I just bought off ebay a Kyosho Inferno MP7.5 K3 which didn't include a air cleaner or clutch etc.. Im looking at getting the OS .21VZ for it and was wondering if any clutch would work? I notice most clutches say that they are for a particular kit but can they still be used on other kits?
Im looking at getting the Ofna Clutch kit
http://www2.towerhobbies.com/cgi-bin...2&I=LXBZT6&P=K
with the Ofna 13t clutch bell and bearing
http://www2.towerhobbies.com/cgi-bin...2&I=LXBL91&P=K
The only other thing I can thing of is the collet
http://www2.towerhobbies.com/cgi-bin...?&I=LXM719&P=7
Will all those work on the Kyosho with the O.S Engine? And is there anything else I need for the clutch side of things?

Also, with the air cleaner. Can I just use one off a Jammin? They seem to be the same design as the Kyosho and I can get one brand new for half the price of the Kyosho Filter
http://www2.towerhobbies.com/cgi-bin...2&I=LXLMW7&P=K

Many Thanks

underway

iTrader: (56)

If you use the entire ofna clutch it will work.....flywheel,shoes,springs and clutchbell....

The air filter assembly will work as well....the kanai 3 is a great car ...if you ever are lookin for parts for it...

www.amainhobbies.com still carries alot of parts and ships international...

downunder23

im not sure on that particular clutch but if you look at the shaft and see whether its a pilot shaft or not and remember or check if the engine the clutch came from is the same then it will fit.

underway

iTrader: (56)

I agree with the above..I didnt look at the pics at first ...If your engine is a pilot shaft everything will work but you will need a clutch nut...as the one in that kit has an adapter on it....