I have been looking at two different .21 conversion kits for the T-maxx and I just want to know your view points on either of them? Likes/Dislikes, experiances, +'s and -'s.


The first one is:

The Mutant Maxx Conversion Kit made by HardCore Racing

or

The second one:

The JT Racing HRC Stage 2 kit


Help me out guys!

just finshed my mutant maxx conv. have not had time to get it on the track yet. I think that it is a well built kit and hardcore was very help full any time i called with questions.

please let me know what you think of it.

got it up and running and burned up a clutch with a 13 tooth have ordered a 11and 12 tooth because it is not geared right. it would not take off good but once it got going it would run about 50mph tires 2in wide and 8in tall. will be racin this weekend and will let you know how it runs.

get the xtm https://www.ssl-stormerhobbies.com/c...pl?pn=XTM32266
iv got that on my maxx and i love it it is so quick and you will need to do new gears in the tranny cause they ate my stock ones up email me if you need more info
[email protected]
josh

Go with the JT chassis.. It uses a Monster pirate center with a monster truck tire friendly 65t spur gear and a slipper as an optional piece. also you should pick up some kind of 1/8 diff conversion for it. this will bring the overall ratio into a very friendly gear ratio for monster truck tires and you will then have good take off and no fried clutches.

the more I check things out.. I've heard of lots of problems about the mutant chassis from gearing to the lack of a front kickup so the front bulks don't line up all that great. Also I understand HCR is not being too friendly to the people that have gearing problems blaming everyone else for the problems and is not allowing any returns if the chassis has been assembled.

Whatever you do, DO NOT power your truck with an OFNA Engine.

get the picco motor its the shit and its a good motor go to xtm's web page and look at the conversion kit its a really good kit i like it a lot