F1 Bodies???
11-04-2005, 08:13 AM
#1
F1 Bodies???
Just checking here would there be a market for a new F1 Body in the shape of todays F1 Cars?????? Yes or No
This would cost me big $$$$$ and sell them for $29.99 to 39.99US
I feel it would be a good thing to come out with.
Tell me what you think.
Click on MLP Link to see what we have done to the F201
This would cost me big $$$$$ and sell them for $29.99 to 39.99US
I feel it would be a good thing to come out with.
Tell me what you think.
Click on MLP Link to see what we have done to the F201
Last edited by Marty Peterson; 11-04-2005 at 11:14 PM. Reason: spelling
11-12-2005, 07:34 PM
#2
Well I have hooked up with a Company in Seoul Korea To make me a Body For the new MLP F2006 F1 2WD and it will mount just like the F201, and as for there workmanship it is Great. I have one of there 200mm Nitro Touring Bodies.
They also make Tires and other stuff like that I have talked with them and we are also going to make Slick Tires front and rear more inline with the style of the old F103 Rubber slicks but belted and with the hot tire compounds of today. along with a rain style tire in 2 diff, compounds, and molded insterts in a soft , med and hard and Foam tires as well These will come from Brazil !
All of these parts will work on the F201 for it all mounts the same as our New 2WD F2006 F1.
I feel that we just came up short in the aftermarket end of the F201 So I will pickup where they left off!
I would like to offer at this time a Pre-book if you could let this ride in your Fourms Please.
This is the time to do it, Most of us are on an off season right now in Racing.
pre-book Bodies go to http://www.mlpmotorsports.net send an email to me with the amount of bodies you wish to have and I will send you back an email with a order number ok. Plus add what body you would like next.
They also make Tires and other stuff like that I have talked with them and we are also going to make Slick Tires front and rear more inline with the style of the old F103 Rubber slicks but belted and with the hot tire compounds of today. along with a rain style tire in 2 diff, compounds, and molded insterts in a soft , med and hard and Foam tires as well These will come from Brazil !
All of these parts will work on the F201 for it all mounts the same as our New 2WD F2006 F1.
I feel that we just came up short in the aftermarket end of the F201 So I will pickup where they left off!
I would like to offer at this time a Pre-book if you could let this ride in your Fourms Please.
This is the time to do it, Most of us are on an off season right now in Racing.
pre-book Bodies go to http://www.mlpmotorsports.net send an email to me with the amount of bodies you wish to have and I will send you back an email with a order number ok. Plus add what body you would like next.
Last edited by Marty Peterson; 08-03-2008 at 12:49 PM.
To bad there is no where to run them here, and no one else has one, lol.
11-17-2005, 08:25 PM
#5
So for the new year in F1 racing:
*will fit or is for the F201 as well.
New Body *
New Chassis layout (50 x50 weight split front to rear) *
Rear Diffuser *
New Tires (for your 2007 season) *
New Rain tires in super soft compounds *
New Foam inserts molded! *
New Spur Adapter and spurgear and pinion sets! 48DP and 64Dp!! *
Still waiting to hear back for the rest
Swaybars Rear! *
Gearboxes Aluminum! *
FPM Lower arms!(with downstop screws) *
Wing Kits *
Working on:
a new motormount and spur mount! (one that you would be able to adjust gear mesh better. *
CVDs * would be nice as well!!!! I will see what I can do ok.
*will fit or is for the F201 as well.
New Body *
New Chassis layout (50 x50 weight split front to rear) *
Rear Diffuser *
New Tires (for your 2007 season) *
New Rain tires in super soft compounds *
New Foam inserts molded! *
New Spur Adapter and spurgear and pinion sets! 48DP and 64Dp!! *
Still waiting to hear back for the rest
Swaybars Rear! *
Gearboxes Aluminum! *
FPM Lower arms!(with downstop screws) *
Wing Kits *
Working on:
a new motormount and spur mount! (one that you would be able to adjust gear mesh better. *
CVDs * would be nice as well!!!! I will see what I can do ok.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
