Hot Bodies Cyclone
#736
Originally Posted by rc-zombies
Great job Steve!!!
too bad doesn't list the part numbers for the diff outdrives...
too bad doesn't list the part numbers for the diff outdrives...
#737
does any one know what shell Andy moore is using, pictured in the attached picture?
#738
Tech Fanatic
Originally Posted by chr15tophe
does any one know what shell Andy moore is using, pictured in the attached picture?
#739
Originally Posted by chr15tophe
does any one know what shell Andy moore is using, pictured in the attached picture?
looks like one of the RI stratus bodies
http://www.speedtechrc.com/store/ebp...?catmainid=376
#740
Tech Fanatic
Originally Posted by axel
#741
just wondering on the cyclone from earlier prototype picts on haras car he had all the nice alluminum purple shhtuff on it and on the later mmore i guess production shots its all black now are the aluminum or plastic?
#742
still trying to get used to this new style massge board
#743
Tech Elite
iTrader: (11)
for the boddy in question, its a stratus 2.0 protoform. i have both the Ri stratus and the 2.0 in front of me. the RI has a lip on the back of the car under the wing. but the wing in the picture is not the standard wing that comes with the 2.0 its somthing else. maybe its teh RI wing, lol
#744
Tech Elite
iTrader: (11)
and for the purple stuff that is NOT on the kit verson i think it has somthing to do with the team drivers such as hara when they made the parts they wanted purple. also the black parts on the kit are NOT plastic (i am pretty sure) if they were plastic then 500 for the kit would be a big rip off. as i stated a few posts up i think it might be a way of creating a hop line for the car so they can make a little extra money or they wanted to keep it black so they could later come out with a Hara verson later that would have all the purple. lastly it could be because the black "stealth" look is becoming a pretty popular as people are starting to put all black wires on their esc and things of the nature.
#745
well i think the black looks wicked
#746
That's what I'm trying most of the time, to make a chassis with not too many colours (black and dark colours prefered). That's a style I really like, I'm not really into all those purple, blue, green, gold, etc coloured/anodized parts.
Though, there is a place where I am trying to use lots of colours, and that's on the body.
Though, there is a place where I am trying to use lots of colours, and that's on the body.
#747
Originally Posted by fjm9898
and for the purple stuff that is NOT on the kit verson i think it has somthing to do with the team drivers such as hara when they made the parts they wanted purple. also the black parts on the kit are NOT plastic (i am pretty sure) if they were plastic then 500 for the kit would be a big rip off. as i stated a few posts up i think it might be a way of creating a hop line for the car so they can make a little extra money or they wanted to keep it black so they could later come out with a Hara verson later that would have all the purple. lastly it could be because the black "stealth" look is becoming a pretty popular as people are starting to put all black wires on their esc and things of the nature.
#748
Originally Posted by fjm9898
for the boddy in question, its a stratus 2.0 protoform. i have both the Ri stratus and the 2.0 in front of me. the RI has a lip on the back of the car under the wing. but the wing in the picture is not the standard wing that comes with the 2.0 its somthing else. maybe its teh RI wing, lol
#750
Tech Champion
iTrader: (9)
Originally Posted by fjm9898
since the Pro4 and Cylone have for the most part the same suspension (i know the towers are different but i dont know how the hole differ) do you think we could copy a setup (suspension wise) from our pro4 to the cyclone?