Futaba FP-T3FG Magnum Senior 3-Channel Radio Control - $125 Cdn plus shipping OBO

I have a vintage but as-new Futaba FP-T3FG "Magnum Senior" 3-channel radio control R/C transmitter to sell. The transmitter comes as shown and includes three (3) rechargeable transmitter battery packs, the bottom cover for the transmitter used when the battery pack is removed, a Futaba dual output charger, and an original Futaba wrist lanyard. This is one of the very few radio control R/C transmitters that can be setup for left-handed use without the need of tools.There has been some success swapping the module for a 2.4gHz version and I read of success using Corona components. Price is only $125 CDN OBO.

Ottawa, Ontario, CANADA pickup, but I can ship within Canada at the buyer's cost. No PayPal, so no USA shipping. Sorry, no exceptions.

Features
- Swivel grip system. The pistol grip section and wheel control section turn over a range of 300 degrees.Superior operating ease in any position, even for left-handed operators.
- Wheel angle adjuster
- Neutral Adjuster
- Ratchet steering dual rates
- Ratchet knob rudder/steering exponential
- Ratchet knob rudder/steering ATV (adjustable travel volume). The servos left and right travel limit can be set independently
- Ratchet knob throttle exponential
- Servo reversing on all 3 channels
- Warm-up switch. The engine can be warmed up by automatically revving the engine
- ATL (adjustable throttle limiter)
- Brake limiter trimmer
- Throttle high side trim knob
- RF module system



Three battery packs and the lower cover.


Right-handed

Power on

Left-handed


Rear module

I have a pair of brand new tires and rims for the Marui Big Bear R/C truck. This vintage truck is now highly collectible that commands high prices on the bay. These tires are new old stock and never mounted. Ottawa pickup, but will ship at the buyer's cost. Asking $120 CDN plus the shipping OBO.



Web image

Complete set

Tires

Hi,
Still for sale?

>> SOLD <<

I have a vintage Corally 12th scale pan car with an Airtronics steering servo and parts to sell. I am not sure which model this is, but it's in decent shape. The rubber dampener pod is intact, but the various O-rings are tired. There is a used body, a set of foam tires that are older, a parts bin with spare body post nuts, plastic C-clips, extra green spur gear, and other misc parts and odds and ends included. The steering servo is a surface mount type by Airtronics and is crazy fast. The servo has been tested and it's perfect and includes the servo saver, but the small model plate fell off and I don't know the exact model. There are also two extra chassis plates, one from Composite Craft and another unknown chassis with front suspension parts mounted, possibly Associated parts. There is a roll-over antenna included as well. Located in Ottawa, Ontario and I am only asking $60

...

Brand new in box, opened to look at the ESC and discovered I ordered the wrong one. My loss your gain.
Great for short course and other off-road vehicles. Specs can be seen at https://www.hobbywingdirect.com/coll...ax10-g2-series.
Will ship at buyer's expense. Local Victoria, BC pickup possible.

Airtronics Caliber 3P Radio Control R/C System & Novak ESCI have a near mint condition Airtronics Caliber 3P radio control system for sale. Comes as shown with the transmitter, original receiver, after market Novak receiver and three sets of crystals. This set is on the FM 27mHz band and has been tested and is fully functional as when new. Ottawa, Ontario, CANADA pickup, but I will ship within Canada on request at the buyer's cost. No USA shipping. Asking $55 for the radio with both receivers and the 3 sets of crystals plus shipping.

NOTE: The Novak ESC seen in my pictures has already been sold.

Caliber 3P Features
- FM 3-Channel Computer System
- Pistol Grip with Wheel Steering
- 3 Model Memory
- Steering Dual Rates
- Steering Exponential
- Trim memory
- End Point Adjustment On All 3 Channels
- Interchangeable Driving Position - Allows for both left and right handed users
- Adjustable Rate Control
- Servo Reversing on all 3 Channels
- Battery Alarm
- Wheel Tension Adjustment
- Cartridge Battery System
- More.....

Time to sell some cars!! All cars are in great condition. I have gone over them and made sure they are in ready to go shape. A800fx evoRc maker ceramic bearings Rc maker geo carbon steering arms, front and rearAwesomatix aluminum arms, front and rearSt265 front bumper. You can adjust the weight with this oneDiff with 2 million fluid with low friction pullyTitanium turn buckles Dampers rebuilt about 4 racers ago$500 Both of the tc are the last generation before the R. A800mmxA w/horizontal rear body postsRc maker ceramic bearings Rc maker geo carbon steering arms, front and rear Awesomatix light weight front spool w/low friction pullyAwesomatix low friction beltsAll upper ball studs are avid 4.9mm Titanium turn buckles Painted zoo racing wolverine body$550 A800mmxA w/vertical rear body postsAvid ceramic bearings Rc maker geo carbon steering arms, front and rear. New in packageSteering bell crank upgrade. Larger bearingsLow friction pully, front and rearTitanium turn buckles Mon-tech twister speciale body$550 All cars come with a spare package. Electronics are available also if you need them. Shipping available. Just message me if you have any questions. Thanks.

Long time lurker.
Used to race back in the day (remember the Hobby Show races at the international center?), and now suffering under from the lack of local track and the burden of age, I am selling some stuff.
I have an Ultima and Optima, original, including 1 unpainted and uncut body for each. I also still have some of the OG stickers, though not sure if they work.
I also have some of the OG aftermarket parts, including the bumpers that were hand-crafted from that old indoor track back in the 80s here in Toronto (totally forgot their name), and Kyosho aftermarket stuff too (gold shocks, etc.).
I'd sell the entire set for 300$, including all of the random parts, old Kyosho "gold" motors, etc.
I can take photos if there is any interest.

Sold

Very well cared for and not even a full season use. Arrowmax 4d 1/10 touring setup station. SOLD + actual shipping. Ships from SK.

Excellent condition Hobbywing xr10 stock spec 1s speed control. This is the 80amp unit. Comes with original box and fan. SOLD + actual shipping. Ships from SK.

ISO Tamiya TB-03 parts

I have 2 complete SRX8 Pro nitro buggy rollers and 2 complete SRX8T nitro truggy rollers with a ton of parts for each.
Looking to get $850 for all of it. Will split shipping.

I’m stepping away from RC for now. My local track is closing, and with my work schedule ending up heavier than expected.

Price list is here:
https://docs.google.com/spreadsheets...it?usp=sharing

Photo album is here:
https://www.dropbox.com/scl/fo/j95vn...=h55f8vmv&dl=0

Located in the GTA. I can meet within a reasonable area along/near the 401 usually during the early days of the week, roughly bounded by:

• East: Brock Street
• West: 404
• South: 401
• North: Hwy 7

I’m also willing to ship within Canada, but buyer covers shipping.

For now, most of the listed parts are new. I’ll continue updating the list with used items as I uncover and organize more.

Please check the spreadsheet for current availability and pricing. If an item is still on the list, it's still available. I’ll remove items as they sell.

Reasonable offers considered, especially on multiple items. Serious buyers only please; unless I know you or have dealt with you before I won't do holds.

PM actually isn't best to get a hold of me, email [email protected]