Tamiya Neo Scorcher
#1
Tamiya Neo Scorcher
Hi All
I wondered if you could help or point me in the right direction.
I have just built the Neo but have an issue where it keeps cutting out.
When I run it, it seem to run fine for lets say 30 seconds then stops and if I let go of the throttle and reapply it jumps forward for a second and stop again.
The battery is fully charged and works my other RC car fine. Everything moves freely when manually turning wheels etc. I have ran the High Point setup for the ESC about 5 times now in case I had done something wrong in the setup.
Not sure Iif i can put a link on this but this link is iphone maildrop video of the car issue
Any pointers would be much appreciated.
Thanks
I wondered if you could help or point me in the right direction.
I have just built the Neo but have an issue where it keeps cutting out.
When I run it, it seem to run fine for lets say 30 seconds then stops and if I let go of the throttle and reapply it jumps forward for a second and stop again.
The battery is fully charged and works my other RC car fine. Everything moves freely when manually turning wheels etc. I have ran the High Point setup for the ESC about 5 times now in case I had done something wrong in the setup.
Not sure Iif i can put a link on this but this link is iphone maildrop video of the car issue
Any pointers would be much appreciated.
Thanks
#2
Tech Initiate
Hi All
I wondered if you could help or point me in the right direction.
I have just built the Neo but have an issue where it keeps cutting out.
When I run it, it seem to run fine for lets say 30 seconds then stops and if I let go of the throttle and reapply it jumps forward for a second and stop again.
The battery is fully charged and works my other RC car fine. Everything moves freely when manually turning wheels etc. I have ran the High Point setup for the ESC about 5 times now in case I had done something wrong in the setup.
Not sure Iif i can put a link on this but this link is iphone maildrop video of the car issue
Any pointers would be much appreciated.
Thanks
I wondered if you could help or point me in the right direction.
I have just built the Neo but have an issue where it keeps cutting out.
When I run it, it seem to run fine for lets say 30 seconds then stops and if I let go of the throttle and reapply it jumps forward for a second and stop again.
The battery is fully charged and works my other RC car fine. Everything moves freely when manually turning wheels etc. I have ran the High Point setup for the ESC about 5 times now in case I had done something wrong in the setup.
Not sure Iif i can put a link on this but this link is iphone maildrop video of the car issue
Any pointers would be much appreciated.
Thanks
What Receiver, ESC and Motor are you using?
#3
What type of batteries are you using? If you run Nimhs and your esc is setup with an LVC for Lipos there will be issues like you are having.