Look - Like New SC10.2 with Motor, ESC and Servo
#1
SOLD
shipped in lower 48, paid via PayPal.
Team Associated SC10.2 / 10.3 that’s been rebuilt and upgraded. Has not been driven since complete refurb and in impeccable condition. This does not include a transmitter or receiver but includes the motor, speed control, servo, body, wheels and tires along with a few spare parts. You will need to either solder the motor wires or add bullet connectors, add your radio system and you’re ready to go.
It’s basically completely new. I bought this vehicle years ago and ran occasionally on the driveway and in the street. It’s never been raced. Performed a complete rebuild and now it’s not been run since the rebuild. The only remaining factory parts on this vehicle are the diff / transmission, shocks and shock towers. Most plastic parts have been replaced (arms, mounts, chassis, knuckles to convert to hex style). Most hardware (screws / nuts / bolts) have also been replaced. Here is a list of all replacement parts.

















shipped in lower 48, paid via PayPal.
Team Associated SC10.2 / 10.3 that’s been rebuilt and upgraded. Has not been driven since complete refurb and in impeccable condition. This does not include a transmitter or receiver but includes the motor, speed control, servo, body, wheels and tires along with a few spare parts. You will need to either solder the motor wires or add bullet connectors, add your radio system and you’re ready to go.
It’s basically completely new. I bought this vehicle years ago and ran occasionally on the driveway and in the street. It’s never been raced. Performed a complete rebuild and now it’s not been run since the rebuild. The only remaining factory parts on this vehicle are the diff / transmission, shocks and shock towers. Most plastic parts have been replaced (arms, mounts, chassis, knuckles to convert to hex style). Most hardware (screws / nuts / bolts) have also been replaced. Here is a list of all replacement parts.
- All new plastic parts including chassis, receiver box, arm mounts and rear chassis plates, bumpers etc. as well as spare original chassis and parts as shown in photos (extra motor mount plate, gear cover, battery strap, chassis and rear plate, front bumper).
- New Avid shock standoffs with bushings
- New JConcepts barcode Tires on used set of rims (not sure of brand)
- Brand new reedy SC800BL Electric Speed Control
- Used but working Castle 1406-1Y 5700kv 4 pole motor
- New LHS 7.2v 2S 5000mah 50c Lipo (both cells sitting at 3.87v)
- New Bearings in some areas and entire new set of spare bearings
- Associated 0712MG Servo
- New Sway Bars in package never installed
- STRC Chassis Brace
- White body, run once and only minimal garage rash from being on shelf

















Last edited by shaveradam; 02-22-2020 at 01:25 PM.




