7Likes

ELECTRIC SCREW DRIVER/GUN

Reply Subscribe

Thread Tools

Search this Thread

02-24-2019 | 10:15 AM

#31

Zerodefect

Tech Champion

Joined: Apr 2008

Posts: 6,031

From: Columbus, OH

I use a tiny Ryobi gun with MIP bits.

Good for disassembly only. You should hand torque for assembly. I only use it's clutch for assembly if it's a through bolt with a nut on the other side.

02-24-2019 | 12:21 PM

#32

Teeyo

Tech Apprentice

iTrader: (1)

Joined: Jan 2019

Posts: 66

Quote:

Originally Posted by Zerodefect

I use a tiny Ryobi gun with MIP bits.

Good for disassembly only. You should hand torque for assembly. I only use it's clutch for assembly if it's a through bolt with a nut on the other side.

With the Hyper Tough on the lowest chuck setting (1) I am still able to tighten the bolts a little more by hand to snug them up on my TLR plastic bolts. So I don’t worry at all about tightening on the lowest setting and always hand snug them after

04-19-2019 | 10:29 AM

#33

ExRCRacer

Suspended

iTrader: (22)

Joined: May 2015

Posts: 929

Quote:

Originally Posted by suzukipro

I have used this one for a couple years now and it is awesome! great clutch and the gyro is actually pretty cool and helps you control speed once you do it a few times.

https://www.dewalt.com/products/powe...y-kit/dcf680n2

This recommendation made me go out and purchase one. I've assembled 3 vehicles in the past 2 months and friggin love this!

Once you get a feel for it (and it won't take long) you'll love it too!