1LikesMinimum spec ESC for 17.5t motor?
10-28-2018 | 08:25 PM
#1
Thread Starter
Tech Initiate
Joined: May 2017
Posts: 46
From: Durham, England
Minimum spec ESC for 17.5t motor?
I have a Trackstar 60A, would a 120A Fleta or similar ESC make any difference. I understand that it may have more features, but would I be missing out on any performance?
10-29-2018 | 06:01 AM
#2
Joined: Jun 2003
Posts: 4,857
Higher end esc's would have lower internal resistance = higher speeds. And maybe from a stop, the 17.5 might draw more than 60A.
10-29-2018 | 06:32 AM
#3
Thread Starter
Tech Initiate
Joined: May 2017
Posts: 46
From: Durham, England
Thanks for the reply. The Trackstar/TORO 120a ESC has a claimed internal resistance of 0.0003ohm, and the Hobbywing EZRUN 0.0004ohm, surely there's not much between then at that level?
10-29-2018 | 07:19 AM
#4
Tech Master
Joined: Jul 2009
Posts: 1,416
From: Deep South Texas
but a 17.5 does pull alot of power.. if Racing.
I run a Tekin 17.5 and a Tekin RS speed controller... in a RC10,SC5M .. as my signature shows.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
