SCX10 - Ready to Run and Tons of spares. Plenty of upgrades.
03-11-2018 | 06:56 PM
#1
Thread Starter
Joined: Mar 2002
Posts: 2,692
From: RIP Frosty, Best Dog Ever
SCX10 - Ready to Run and Tons of spares. Plenty of upgrades.
SOLD
Started life as a SCX10 Kit. Upgraded the lower and upper links to the long wheelbase Axial Aluminum Links, and started working towards a Cherokee. This truck has been used but not abused and has very little run time on it. Everything is in really good shape and it has quite a few upgrades as listed below. This is Ready to Run (add your own battery) so you can start crawling today. Never got into the crawling scene much so was more of a trail truck. Any questions please ask. Asking $370.00 Shipped
* Pro-line Flat Iron XL and Aluminum Beadlocks
* Aluminum Upper and Lower Links ( Can go either 12" or 12.3" WB)
* Aluminum Servo Mounts and Servo Arm
* Aluminum Steering Links
* Aluminum Skid Plates
* Aluminum Knuckles and C-Hubs (Front)
* Aluminum Lockout (Rear)
* Brass Axle Tubes
* Dual Rate Shocks with a second full set of shocks
* Winch w/ controller (Will need to solder leads)
* Metal Winch Hook
* Aluminum Front Bumper (Mounted but never ran, NOT on truck in pictures
* Harley Designs Battery/Electronis Tray
* Tons of spares including full set of shocks, 3 front bumpers, rear bumper, 3 stock tires (if I find the other two will include them), Axial light bar kit, original battery box, extra links, driveshafts, battery trays, servo mounts, etc. EVERYTHING in the pictures goes with it and any extras I find too.
Started life as a SCX10 Kit. Upgraded the lower and upper links to the long wheelbase Axial Aluminum Links, and started working towards a Cherokee. This truck has been used but not abused and has very little run time on it. Everything is in really good shape and it has quite a few upgrades as listed below. This is Ready to Run (add your own battery) so you can start crawling today. Never got into the crawling scene much so was more of a trail truck. Any questions please ask. Asking $370.00 Shipped
* Pro-line Flat Iron XL and Aluminum Beadlocks
* Aluminum Upper and Lower Links ( Can go either 12" or 12.3" WB)
* Aluminum Servo Mounts and Servo Arm
* Aluminum Steering Links
* Aluminum Skid Plates
* Aluminum Knuckles and C-Hubs (Front)
* Aluminum Lockout (Rear)
* Brass Axle Tubes
* Dual Rate Shocks with a second full set of shocks
* Winch w/ controller (Will need to solder leads)
* Metal Winch Hook
* Aluminum Front Bumper (Mounted but never ran, NOT on truck in pictures
* Harley Designs Battery/Electronis Tray
* Tons of spares including full set of shocks, 3 front bumpers, rear bumper, 3 stock tires (if I find the other two will include them), Axial light bar kit, original battery box, extra links, driveshafts, battery trays, servo mounts, etc. EVERYTHING in the pictures goes with it and any extras I find too.
Last edited by 2canSAM; 03-12-2018 at 11:31 AM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
