Tekin RS Pro ESC
02-14-2018, 04:18 PM
#1
Tekin RS Pro ESC
SOLD
Hi... I'm selling this Tekin RS Pro ESC Speed Control
Clean & works great
Comes as pictured with
~7" long motor wires
Battery wires with 4mm bullet plugs
New power capacitor
Motor sensor wire
& Manual
I left the wiring off the esc, so you can arrange the wiring
to fit your application.
This is typically a "mod" low turn motor speed control
But good for stock & higher turn motors too
No motor limit
Specifications:
Controls: Forward/Brake/Reverse
ON Resistance: 0.00005 Ohms brushed fwd mode, 0.00015 Ohms brushless mode, 0.00015 brushed fwd/reverse mode
Input Voltage: 4-9 Cells, 2-3S Lipo
BEC: 6.0V/3.0A
Motor Limit: None
Throttle Profiles: 7 choices (on board)
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1.3 x 1.00" x .60" (33 x 25.4 x 15.25mm)
Weight: 2.3oz with included 12G wiring
125.00 shipped
Paypal
Thank you!!!
Hi... I'm selling this Tekin RS Pro ESC Speed Control
Clean & works great
Comes as pictured with
~7" long motor wires
Battery wires with 4mm bullet plugs
New power capacitor
Motor sensor wire
& Manual
I left the wiring off the esc, so you can arrange the wiring
to fit your application.
This is typically a "mod" low turn motor speed control
But good for stock & higher turn motors too
No motor limit
Specifications:
Controls: Forward/Brake/Reverse
ON Resistance: 0.00005 Ohms brushed fwd mode, 0.00015 Ohms brushless mode, 0.00015 brushed fwd/reverse mode
Input Voltage: 4-9 Cells, 2-3S Lipo
BEC: 6.0V/3.0A
Motor Limit: None
Throttle Profiles: 7 choices (on board)
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1.3 x 1.00" x .60" (33 x 25.4 x 15.25mm)
Weight: 2.3oz with included 12G wiring
125.00 shipped
Paypal
Thank you!!!
Last edited by JBAYRC; 02-16-2018 at 10:39 AM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
