UPDATE: Axial RR10 Project (1/10 RockRacer)

CastleCreation 1:8 E-BUGGY EDITION
ESC: MAMBA X
BL Motor: 1515-2200KV SENSORED (5mm)
Power: Revolectrics 4S 3300 70C(Burst 140C)

With a set of Pitbulls, MSD Beadlocks, Sensored CastleCreations 2200KV 1/8 BL and Mamba X, and 4S 100C Lipo -- this Beast goes Superfluously Extreme, YEBA! O, thanks to the x-owner, powertrain upgrades (where its counts to improve performance) are complete. Cheers!

Got DHL Tracking# from HARM Racing World - GERMANY. Delivery is next week, genuinely Exhilarating.


The Harm Racing Kart (RK-1E e-Drive) is their Newest Product for 2018.

Also got power plant and batteries. Thanks to Revolectrics, Hobbywing, and Tenshock.



Max6 and X501S 960 KV + 8S, was highly recommended by Harm Team Driver Jorn Scmitt. He told me that there is more than enough power with this configuration. Thanks to Silvia of HARM Racing Germany, for the Arrangement. KUDOS!

1/8 and 1/5 Monster Trucks

2018 HARM E-Drive Racing Kart 1/2.5 Scale

HARM Racing Kart - EP

Just waiting on (4) FUTABA Servos (2) for steering and (2) for the F/R Hydraulic Brakes. Plus an R334SBS RX TELEMETRY for the Futaba 7PX.



Futaba x OS Engine 80th Anniversary Speed B1
Supreme speed, torque and response Compatible with Futaba® S.Bus2

The Futaba O.S. Speed B1 servo deliver premium performance for drivers who demand nothing but the best. In addition to all-metal cases, ceramic bearings and hybrid gears, all feature S.Bus2 compatibility, plus adjustable programming for Deadband, Smoother, Damper, Stretcher and Boost. Drivers can also fine-tune programming parameters with the Futaba 4PX and the NEW 7PX.

Speed B1 HV S.Bus2 Servo
Full metal case
Hybrid final gear
Ceramic bearing
Speed @ 7.4V: 0.06 sec./60°
Torque @ 7.4V: 342 oz-in (24.6 kg-cm)
Dimensions: 1.6 x 0.8 x 1.5 in (40.5 x 21.0 x 37.2 mm)
Weight: 2.6 oz (73 g)

may I know where did you buy your driver figure? is it 1/5 scale driver or much larger?

DRIVER is designed specifically for the HARM Racing Kart (Gas and Electric) @1:2.5 Scale. DRIVER will NOT be suitable for 1:5 F1/TOURING CAR/MONSTER TRUCK.

ok Understood. Thank you!

If for a 1/5 or 1/6, Team Losi DBXL-E Driver.

Happy CNY! Back from a Break and got in the mailbox, 4 Futaba Servos (Steering and HydroBrake) and a Futaba 7Px Receiver - for the Racing GO Kart. Still much to be done before we get this Monster to Life!

Mounting the Steering and Brake Servos

Grabbed Tamiya PS60's from Swan Model. Thanks!

Cool looking truck! What kind of tires are those, and what size?