404LikesYokomo YZ-4 SF
11-10-2021 | 11:57 AM
#1021
Sounds kind of like the one track I go to but more traction I would expect.
Personally, I'd probably start with this setup:
https://site.petitrc.com/setup/yokom...Beach20201122/
Thought I may go with a bit lighter diffs to start with, maybe 10k 4 gear front and rear.
If the track has a lot of flat landing bit jumps, I'd probably consider some 2 x 1.7mm pistons on the rear as well
Personally, I'd probably start with this setup:
https://site.petitrc.com/setup/yokom...Beach20201122/
Thought I may go with a bit lighter diffs to start with, maybe 10k 4 gear front and rear.
If the track has a lot of flat landing bit jumps, I'd probably consider some 2 x 1.7mm pistons on the rear as well
11-10-2021 | 12:02 PM
#1022
Tech Addict
Joined: Jan 2003
Posts: 569
From: Montréal, Qc
Sounds kind of like the one track I go to but more traction I would expect.
Personally, I'd probably start with this setup:
https://site.petitrc.com/setup/yokom...Beach20201122/
Thought I may go with a bit lighter diffs to start with, maybe 10k 4 gear front and rear.
If the track has a lot of flat landing bit jumps, I'd probably consider some 2 x 1.7mm pistons on the rear as well
Personally, I'd probably start with this setup:
https://site.petitrc.com/setup/yokom...Beach20201122/
Thought I may go with a bit lighter diffs to start with, maybe 10k 4 gear front and rear.
If the track has a lot of flat landing bit jumps, I'd probably consider some 2 x 1.7mm pistons on the rear as well
Martin Paradis
11-10-2021 | 12:16 PM
#1023
The kit setup also isn't too bad either, with the front springs possibly feeling a bit light.
11-14-2021 | 03:51 PM
#1024
Last edited by Cain; 11-14-2021 at 04:05 PM.
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)