Community
Wiki Posts
Search
Like Tree396Likes

Tekno MT410

Thread Tools
 
Search this Thread
 
Old 10-23-2017 | 11:41 AM
  #1276  
Tech Rookie
 
Joined: Sep 2017
Posts: 4
Default

Originally Posted by Steel_Rain
The connector issue has been debated to death on many RC forums and I don't want to take part in a flame fest.

The extremely short and biased answer you'll find from me is this:

3s and lower, XT60.
4s-6s, XT90.
6s-10s, XT150.

I can bore you to DEATH with wiring gauges, peak current draw vs voltage, wire lengths and total amperage requirements, but the above works in my real world applications and I have experience with all three types.

Your results may differ.
Yeah, from what I had read it sounds like xt60 would probably be ok but I will go ahead and spend the little bit extra time and money to use xt90s for the extra peace of mind.

Thanks Steel Rain for helping me make up my mind.
Steel_Rain likes this.
usqview is offline  
Old 10-23-2017 | 02:35 PM
  #1277  
Tech Addict
iTrader: (2)
 
Joined: Aug 2016
Posts: 629
Default

I have been thinking about swapping over all my deans stuff.... which is everything to XT90s. They are nice.
Zinergy is offline  
Old 10-23-2017 | 03:49 PM
  #1278  
vettehigh's Avatar
Tech Addict
iTrader: (4)
 
Joined: Feb 2017
Posts: 686
From: Upstate, NY
Thumbs up

Originally Posted by Zinergy
I have been thinking about swapping over all my deans stuff.... which is everything to XT90s. They are nice.
I sent an email to Hobbywing and Tekno to see what their advice is. I have Deans now, but was thinking of Amass XT90's
vettehigh is offline  
Old 10-23-2017 | 04:11 PM
  #1279  
Tech Initiate
 
Joined: May 2017
Posts: 29
Default

+1 vote for xt90's
JonnyP is offline  
Old 10-23-2017 | 05:50 PM
  #1280  
0verkill's Avatar
Thread Starter
Tech Master
iTrader: (8)
 
Joined: Oct 2010
Posts: 1,189
From: Birmingham, AL
Default

New product! T-Bone Racing Rear Arm Mud Guards

Big thanks to Jeff @ T-Bone Racing for getting this done! Awesome customer service! These are not up on their website yet but will be soon.



0verkill is offline  
Old 10-23-2017 | 06:29 PM
  #1281  
vettehigh's Avatar
Tech Addict
iTrader: (4)
 
Joined: Feb 2017
Posts: 686
From: Upstate, NY
Questions??

Originally Posted by 0verkill
New product! T-Bone Racing Rear Arm Mud Guards

Big thanks to Jeff @ T-Bone Racing for getting this done! Awesome customer service! These are not up on their website yet but will be soon.



I have the below guards from Tekno, are these different?

http://www.teknorc.com/shop/tkr5433-...rds-et48-nt48/

It would be cool if T-Bone made a chassis skid plate out of there nylon/delrin of the MT410
vettehigh is offline  
Old 10-23-2017 | 06:59 PM
  #1282  
0verkill's Avatar
Thread Starter
Tech Master
iTrader: (8)
 
Joined: Oct 2010
Posts: 1,189
From: Birmingham, AL
Default

Originally Posted by vettehigh
I have the below guards from Tekno, are these different?

http://www.teknorc.com/shop/tkr5433-...rds-et48-nt48/

It would be cool if T-Bone made a chassis skid plate out of there nylon/delrin of the MT410
The Tekno ones are made of lexan, mine are all cracked and beat up. They do, it's listed under the EB48, which is the same as the MT410. https://tboneracing.net/collections/...id-tekno-eb-48
0verkill is offline  
Old 10-23-2017 | 07:00 PM
  #1283  
0verkill's Avatar
Thread Starter
Tech Master
iTrader: (8)
 
Joined: Oct 2010
Posts: 1,189
From: Birmingham, AL
Default

Installed

0verkill is offline  
Old 10-23-2017 | 08:24 PM
  #1284  
Tech Regular
 
Joined: Dec 2008
Posts: 365
Default

F650 body on the truggy MT conversion. Someone wanted to see it👍


xirton, FunnieKid and bootbox like this.
Dragonfueled is offline  
Old 10-24-2017 | 02:17 AM
  #1285  
Tech Apprentice
 
Joined: Aug 2017
Posts: 60
From: Ulaanbaatar
Default

There was some rubbing on the big tires but otherwise it fit really well. What do you think?








MongolPete is offline  
Old 10-24-2017 | 04:50 AM
  #1286  
vettehigh's Avatar
Tech Addict
iTrader: (4)
 
Joined: Feb 2017
Posts: 686
From: Upstate, NY
Questions??

Originally Posted by 0verkill
The Tekno ones are made of lexan, mine are all cracked and beat up. They do, it's listed under the EB48, which is the same as the MT410. https://tboneracing.net/collections/...id-tekno-eb-48
I'm looking for a full chassis skid that covers the complete underbody of the MT410. It goes from the front bumper to the rear bumper and screws in under both bumpers.
vettehigh is offline  
Old 10-24-2017 | 06:56 AM
  #1287  
vettehigh's Avatar
Tech Addict
iTrader: (4)
 
Joined: Feb 2017
Posts: 686
From: Upstate, NY
Default

Originally Posted by vettehigh
I sent an email to Hobbywing and Tekno to see what their advice is. I have Deans now, but was thinking of Amass XT90's
HW gave the nod to the XT90 connectors
Tekno gave the nod to Traxxas connectors

Then I see there are XT90-S Anti-Spark connectors

Last edited by vettehigh; 10-24-2017 at 07:11 AM.
vettehigh is offline  
Old 10-24-2017 | 08:45 AM
  #1288  
Tech Initiate
 
Joined: Sep 2016
Posts: 46
From: Alberta, Canada
Default

Originally Posted by Dragonfueled
F650 body on the truggy MT conversion. Someone wanted to see it👍
Real nice paint job, from the right angle that almost looks like the real 1:1 version haha! What am i seeing through your windows, is that drywall tape and shoe goo?
3500ltz is offline  
Old 10-24-2017 | 08:51 AM
  #1289  
Tech Initiate
 
Joined: Sep 2016
Posts: 46
From: Alberta, Canada
Default

Originally Posted by MongolPete
There was some rubbing on the big tires but otherwise it fit really well. What do you think?
Looks really good man and those tires are HUGE! Some people will hate on the Traxxas logo haha but i do like the body...very much a dune buggy look!

Not sure if you are purposely running the body that high in the rear due to tire rub or not! Where possible I always found running the body as low to the car as you can reduces snapped body posts and your body posts punching through your body on lid landings! Just wanted to share so everything lasts longer!
3500ltz is offline  
Old 10-24-2017 | 01:13 PM
  #1290  
Tech Regular
 
Joined: Dec 2008
Posts: 365
Default

Originally Posted by 3500ltz
Real nice paint job, from the right angle that almost looks like the real 1:1 version haha! What am i seeing through your windows, is that drywall tape and shoe goo?
Must be a reflection the windows are clear and nothing inside ....weird
Dragonfueled is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.