Cool body and color, looking good with the Mashers too!

Those tires are huuuuuuuuuuuuuuuuge

Looks good Pete!

I am nearing the end on my MT410 build too. Last thing I need are 4s packs. What packs are people using? Low price but reliable would be ideal. I see SMC has a 5.2a 4s on special right now. How would the run time be with 5.2a lipo or should I go for a large amp hour lipo?

build-
Xerun xr8+
Xerun 4268 1900kv
Savox 1270
Pro-line raptor body
Pro-line Badlands 3.8

usqview,

I got 2 2s 100c 8000mah hardcase lipos from RC juice. I haven't run em yet but they came highly recommended from a guy on the mt410 Facebook page.

I had considered running a pair of 2s... let me know what you think of them and run time. Should make for a pretty long run time.

Thanks Pete!

The MT410 is like a small dog who had cokaine for breakfast so I stick to 6500mah cause I can't concentrate that long.

SMC 5200mAh

Hey guys,

Wow! I really like and can relate to the small dog on cocaine analogy. The duct tape worked, by the way. It cracked in a place I did not apply tape. I guess the back flips require an Ultimate RC body.
If 4s is like this, 6s must be like a small dog that has snorted from the pile off of Tony Montana's desk.
I'll get some bashing pics and video tomorrow.


Ready to bash with the Slash.



Before 1st run



After 1st run, lol



1st run crack!



Survived the day

Am I correct to assume the TKR5000FB Hard Anodized Chassis will be a direct fit for the MT410?

Get some amazing goop, e6000 or shoe goo and drywall tape. It will make the body more durable. Mine has been thru alot and I only have 2 cracks around the body post holes, one of them due to user error. These proline bodies crack easilly.

What funniekid said! I had a body that was almost garbage it had so many cracks in it (from a used truck i bought). With some drywall tape a shoegoo i managed to save it and probably extended its life 10 times over. Definitely works better than duct or gorilla tape from my experience

Yes, shoe goo and drywall tape don't always prevent cracks but it makes sure it doesnt tear any more.

Are xt60s okay to run with 4s in the MT410? Or should I step up to xt90s and make a few adapters?

THESE ARE FROM MY TEKNO MT410 - THEY FIT SEVERAL OTHER TEKNO'S
ALL PARTS ARE BRAND NEW EXCEPT SHOCK SHAFTS (ONLY USED FOR 30 MINUTES)

TKR5199 – Rear Hubs
TKR5263 – Split Cntr Diff Mount
TKR6018 – Shock Caps and Spring Adjustment Collars
Shock Shaft Guides
TKR6061 - Shock Shafts
TKR6017 - Shock Shafts

http://www.rctech.net/forum/r-c-item...brand-new.html

The connector issue has been debated to death on many RC forums and I don't want to take part in a flame fest.

The extremely short and biased answer you'll find from me is this:

3s and lower, XT60.
4s-6s, XT90.
6s-10s, XT150.

I can bore you to DEATH with wiring gauges, peak current draw vs voltage, wire lengths and total amperage requirements, but the above works in my real world applications and I have experience with all three types.

Your results may differ.