lets see your 1/5th scale pics
#341
tlr 5ive b conversion
-zenoah g320RC
-bartolone tuned pipe
-fid 2 speed
-rovan slt chassis
-tlr 5ive b suspension arms, turnbuckles, driveshafts
-10k clutchsprings (10'000rpm)
-grafil G-REVO Body (MCD RR5)
-zenoah g320RC
-bartolone tuned pipe
-fid 2 speed
-rovan slt chassis
-tlr 5ive b suspension arms, turnbuckles, driveshafts
-10k clutchsprings (10'000rpm)
-grafil G-REVO Body (MCD RR5)
Last edited by mike_G; 10-27-2017 at 10:27 AM.
#345
yes dave, the fid racing 2 speed holds up really well, its bullet proof.
the shiftpoint is very constant.
( on a sidenote: it's working with a pawl, once its engaged, but the rpm of the engine drops because for example driving up a hill, it stays engaged. you have to lift the throttle trigger, so there is no load on the 2 speed and it shifts down to first gear , thus better gear ratio for lower rpm uphill acceleration until engine reaches higher rev and torque output.
with a 2 speed that is working with clutchshoes even under load its shifting down immediately once the rpm drops, thus less centrifugal force is existing.)
but I really recommend this product!
it's so cool when the 2 speed tranny shifts and the 5ive gain some more speed
the shiftpoint is very constant.
( on a sidenote: it's working with a pawl, once its engaged, but the rpm of the engine drops because for example driving up a hill, it stays engaged. you have to lift the throttle trigger, so there is no load on the 2 speed and it shifts down to first gear , thus better gear ratio for lower rpm uphill acceleration until engine reaches higher rev and torque output.
with a 2 speed that is working with clutchshoes even under load its shifting down immediately once the rpm drops, thus less centrifugal force is existing.)
but I really recommend this product!
it's so cool when the 2 speed tranny shifts and the 5ive gain some more speed
Last edited by mike_G; 10-27-2017 at 10:41 AM.



46Likes









