65LikesSpeedmerchant Roadkill 10 235mm Pro10 Pancar
09-20-2017 | 06:05 AM
#662
Tech Adept
Joined: Jan 2005
Posts: 210
Yes. I'm just finishing up the renders and box art for the RK10 Carpet and Rev 8.5.
If you order a RK, you'll get the new narrow chassis, new bottom plate that has room to mount a fan, and the bumper designed for the Protoform Swift body.
Have a great day.-Bruce
09-20-2017 | 12:10 PM
#663
Nope on both, new screws very tight (still tight when losing them to change mess) and tried a different motor.
09-20-2017 | 12:12 PM
#664
make sure you are using the correct rear pod inserts for the bearings, they are not all the same. I made the mistake if using some of my Yokomo inserts which are about 2mm smaller than the speedmerchant ones. I couldnt figure out why I kept stripping spur gears, until i held the car in my hand and pulled full throttle and watched the axle jumping up and down!
09-29-2017 | 05:20 PM
#665
09-29-2017 | 05:31 PM
#666
09-29-2017 | 06:18 PM
#667
can't access
I'm not on Facebook, interested in what this is. :-)
thanks.
09-29-2017 | 09:33 PM
#668
I gotta post another way
It's a interview I did with Bruce. He was testing at 360 with Donny Lia
Pro ten with 17.5 ....5 min
Times were about .4 slower than mod 1/12 on our layout. Super fast. Super manageable hp.
Also was running a high modulous Carbon chassis. Really trick
It's a interview I did with Bruce. He was testing at 360 with Donny Lia
Pro ten with 17.5 ....5 min
Times were about .4 slower than mod 1/12 on our layout. Super fast. Super manageable hp.
Also was running a high modulous Carbon chassis. Really trick
09-29-2017 | 09:37 PM
#669
10-03-2017 | 09:55 PM
#671
Hi Muffin,
Yes. I'm just finishing up the renders and box art for the RK10 Carpet and Rev 8.5.
If you order a RK, you'll get the new narrow chassis, new bottom plate that has room to mount a fan, and the bumper designed for the Protoform Swift body.
Have a great day.-Bruce
Yes. I'm just finishing up the renders and box art for the RK10 Carpet and Rev 8.5.
If you order a RK, you'll get the new narrow chassis, new bottom plate that has room to mount a fan, and the bumper designed for the Protoform Swift body.
Have a great day.-Bruce
Does the new bottom plate fit on the old RK? Would love to mount a fan on mine.
