1LikesNew stuff from Tekin
11-08-2016 | 03:28 AM
#16
Tech Addict
iTrader: (8)
Joined: Nov 2011
Posts: 717
hotwire pretty much is a program box, just fancier. but one thing, it would be much more appealing if hotwire was built into our esc's. thus eliminating plugin's in hotwire. All you'd have to do is turn your car on, or when the radio turns on, the car does as well and then turn your phone on, whamo hotwire on your phone, no plugins. That i'd pay for, but this isn't "new" tech at all.
12-12-2016 | 11:18 AM
#20
Team Tekin
Joined: Mar 2005
Posts: 1,199
Quick update on new items...
Hotwire 3.0 with BLE is moving along. We did run into a late challenge we had to deal with, but looks like we have it figured out and we just have to finish up and build them.
The RSX did replace the RSpro, but we are bringing the Rspro back due to popular demand by some groups.
We are moving forward with the 1S units and will have an update on them early in Jan.
Hotwire 3.0 with BLE is moving along. We did run into a late challenge we had to deal with, but looks like we have it figured out and we just have to finish up and build them.
The RSX did replace the RSpro, but we are bringing the Rspro back due to popular demand by some groups.
We are moving forward with the 1S units and will have an update on them early in Jan.
01-16-2017 | 09:15 AM
#22
Tech Initiate
Joined: Apr 2016
Posts: 25
From: Victoria, BC
Quick update on new items...
Hotwire 3.0 with BLE is moving along. We did run into a late challenge we had to deal with, but looks like we have it figured out and we just have to finish up and build them.
The RSX did replace the RSpro, but we are bringing the Rspro back due to popular demand by some groups.
We are moving forward with the 1S units and will have an update on them early in Jan.
Hotwire 3.0 with BLE is moving along. We did run into a late challenge we had to deal with, but looks like we have it figured out and we just have to finish up and build them.
The RSX did replace the RSpro, but we are bringing the Rspro back due to popular demand by some groups.
We are moving forward with the 1S units and will have an update on them early in Jan.
I know Holidays were quite rough for you. I wish you a quick recovery.
01-16-2017 | 03:00 PM
#24
03-04-2017 | 06:19 PM
#27
Hopefully still around (but with some improvements).
If they just beef up the case, and reinforce the posts so they don't fail where soldered to the PCB, the RX8 would be perfect. I really love how smooth they are, but the durability is somewhat sketchy, even with them mounted Kyosho zeal tape in all of my rigs.
If they just beef up the case, and reinforce the posts so they don't fail where soldered to the PCB, the RX8 would be perfect. I really love how smooth they are, but the durability is somewhat sketchy, even with them mounted Kyosho zeal tape in all of my rigs.