Tekin ESC Tuning and Programing
10-06-2016 | 11:09 PM
#121
Tech Master
iTrader: (30)
Joined: Jun 2015
Posts: 1,974
Randy Pike - Can you provide your setup similar to below for 17.5 stock buggy? I find the setup sheets don't have all the detail like below
Hey Randy - Below are my current settings:
Drag Brake Off
Brake Minimum 0
Active Brake 0
Brake Strength 100
Push Control 0
Brake Frequency 6101
Throttle Min 18
Neutral Width 12
Reverse Speed 100
Throttle Frequency 2007
Reverse Delay 0.76
Torque 10
Timing Profile 1 - Spec Stock
21.5t Fantom FR1 Motor running 35deg end bell timing
The only thing I have changed is the Tekin update, like I said the car just seems low on punch/power. Any advice would be greatly appreciated!
Cheers,
Drag Brake Off
Brake Minimum 0
Active Brake 0
Brake Strength 100
Push Control 0
Brake Frequency 6101
Throttle Min 18
Neutral Width 12
Reverse Speed 100
Throttle Frequency 2007
Reverse Delay 0.76
Torque 10
Timing Profile 1 - Spec Stock
21.5t Fantom FR1 Motor running 35deg end bell timing
The only thing I have changed is the Tekin update, like I said the car just seems low on punch/power. Any advice would be greatly appreciated!
Cheers,
10-07-2016 | 06:56 AM
#122
Honestly I do not know how to set my brake frequency or how to even look at it. I have re calibrated my radio and ESC. Is the brake frequency done through the radio or is it something that I need the hotwire for? If the case is with hotwire I can order one and check to see if that may lead me to any further improvements.
The frequency will have to be adjusted thru the Hotwire. There are some other brake adjustments as well in the hotwire.
Curious if all the LED's light up and flash when you apply full brakes?
10-10-2016 | 02:51 PM
#123
Brake Minimum 0
Active Brake 0
Brake Strength 100
Push Control 0
Brake Frequency 6000
Throttle Min 15
Neutral Width 5
Reverse Speed 100
Throttle Frequency 4000
Reverse Delay n/a
Torque 10
Timing Profile 1 - Spec Stock
Here you go
10-20-2016 | 09:04 PM
#124
Hi guys
Sorry if this has been covered and i've missed it but i I've got original tekin RS escs and a tekin B1. Firstly will v255 software work on them and secondly do the functions such as drive frequency work when the rs is running in brushed mode and on the b1?
Cheers
Sorry if this has been covered and i've missed it but i I've got original tekin RS escs and a tekin B1. Firstly will v255 software work on them and secondly do the functions such as drive frequency work when the rs is running in brushed mode and on the b1?
Cheers
10-20-2016 | 09:26 PM
#125
Also sorry, I've read the FAQ and the 255 release wiki page etc and the hotwire info. I cant find if I am able to update the software on the Hotwire and therefore the esc using the android app or if i must use a PC by downloading the new hotwire program and updating that way
cheers
cheers
10-24-2016 | 07:25 AM
#129
10-24-2016 | 02:12 PM
#130
The B1 had the choice of 25 or 32 software I think it was.
Cheers
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)