Axial Dingo w/ Extras
09-25-2014 | 01:59 PM
#1
Axial Dingo w/ Extras
I'm selling my lightly used Axial Dingo scaler with some extras. Everything works perfectly and is less than 2 months old. I wanted to try crawling, but it just isn't for me. The kit is in excellent condition with a few surface scratches on the lower links. I installed slightly longer aluminum links in the rear to extend the wheelbase a few mm and full 4-link suspension is currently installed, but all original links are included. I replaced most of the stock screws with machine screws during the initial build. Also included with the roller:
Novak GOAT 3s ESC & fan
Novak 18.5 Ballistic brushless Crawler motor
Savox 1258 servo
SPC 4300 3s lipo
Castle Creations 10-amp external BEC
Chevy Silverado body painted blue and heavily trimmed for the 2.2 tires
Dingo body (cut but unpainted)
all plastic pieced and aluminum links that came with the kit
original 1.9 wheels and tires are glued and brand new
2.2 wheels and tires are included and with lots of tread
Radio and receiver are NOT included!
Asking $285 shipped within the continental U.S. Paypal only, please. Call or text me @ (828)702-4107 if you have any questions. Thanks for looking!
Derek
Novak GOAT 3s ESC & fan
Novak 18.5 Ballistic brushless Crawler motor
Savox 1258 servo
SPC 4300 3s lipo
Castle Creations 10-amp external BEC
Chevy Silverado body painted blue and heavily trimmed for the 2.2 tires
Dingo body (cut but unpainted)
all plastic pieced and aluminum links that came with the kit
original 1.9 wheels and tires are glued and brand new
2.2 wheels and tires are included and with lots of tread
Radio and receiver are NOT included!
Asking $285 shipped within the continental U.S. Paypal only, please. Call or text me @ (828)702-4107 if you have any questions. Thanks for looking!
Derek
Last edited by nagreend; 09-26-2014 at 05:06 PM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
