my 8th scale 8.2e does.

So your sc10 doesnt? I have 2 sctes and a sc10 I was hoping to haul in it.

Any input guys?

My first thought would be DD's or maybe flip outs in either green or blue

I think they will.

For SCT, Doubledees (DD) in Green compound would be a baseline starting point. Use Blue front/Green rear for a nice smooth steering feel on a loose/typical outdoor track that has a clean driving line.

If the track gets abrasive or rough/potholes and wear is a concern or you want more side bite in the rear, move to 3D's.

For 2w buggy use green compound; DD or Splitters, but add Flipouts. They work exceptional as an all around outdoor tire that you can use at the beginning of the day when there's more dust then swap back to a DD later in the day. Splitters offer a little nicer feel than DD's sometimes as the track gets cleaner, either is a good choice.

2w front you'll want a traditional ribbed tire or you can make your own DD fronts by cutting them down. Otherwise Rips/Rounder will have you covered.

Serpent 1/10 scale parts would be awesome... just sayin!

Are there any options in the pipeline for the kyosho zx6??

Some carbon fiber would be nice, 12mm front wheels, and a finnisher body would be nice

A body for sure; nothing on hopups right now.

I vote for the finnisher.

Can't seem to find the part # for JC Steering bell crank for the B5/B5M...

They haven't been officially announced/released yet, but there should be something very soon .

Greetings PW... Any update/eta on the d413 body?

They are working on the photos and press release now and should be released next week.