Team Associated TC4
#2671
Jason, I'm sorry and I know its a bit early but would you know the price of the top deck only compared to the whole chassis?
I'll be looking foward to those pics...
I'll be looking foward to those pics...
#2672
Tech Lord
iTrader: (13)
the top deck is going to be different than the one that comes on my kit.i move some things around on my kit which is why the top deck probably wouldnt fit.the top deck for the tub chassis will fit the tc3 and 4.the price is going to be $29.99 and will include top deck,standoffs and mounting screws.it does have the
"BMI RACING" logo engraved on the top surface just like on the kit.let me know if you need any more info.
"BMI RACING" logo engraved on the top surface just like on the kit.let me know if you need any more info.
#2673
Thanks Jason!! Looking foward to getting that or the whole chassis soon.
#2675
Tech Elite
iTrader: (11)
The only complaint that I've heard from anyone that has run one ofthe BMI chassis is that the entire top plate needs to be removed in order to access the diffs...
Was any consideration given to notching out the top plate so that it only connects to the lower part of the diff case instead of also connection at the 2 screws above the center shaft drive cups on the upper part of the diff case?
Was any consideration given to notching out the top plate so that it only connects to the lower part of the diff case instead of also connection at the 2 screws above the center shaft drive cups on the upper part of the diff case?
#2676
I would rather have to take out like 12 screws then not have a top deck, the mounting it has now is fine. It is similar to the mounting of the one on the ETC3.
The kai chassis does not have a top deck, they have a different way of stiffening the chassis.
The kai chassis does not have a top deck, they have a different way of stiffening the chassis.
#2677
see
#2678
Tech Lord
iTrader: (13)
unfortunately due to the location of the spur gear i couldnt make the top deck to allow for removal of rear tranny housing top.the front diff housing can be removed without removing the top deck.the top deck is mounted in the same locations as the side braces.the only way i could make it possible to do the rear is to remove the cross section behind the spur gear but it took too much strength away from the top deck.
#2679
no top deck see here