Novak GTB 3 issues.
04-08-2014 | 11:24 AM
#1
Novak GTB 3 issues.
#1: No reverse.
#2: only 2 throttle profiles?
Multiple one touch attempts.
DX3R TX,Spectrum RX,8.5 Vulcan,2S 30C,Deans plugs,w and w/o power cap
(glitch buster),Air Servo,17/90 gearing in a Associated T-4 2WD truck.
I get green blinky in reverse mode but truck just stutters.(5% reverse?)
Re set expo,sub trim,travel lots of times looking for reverse.
Bound RX and even went to a copy another models settings.
Runs fine,otherwise.
GTB 3 instructions are incomplete!
I had to dig out my GTB2 instructions to set drag brake,etc.
I did such a nice install,I would HATE to pull it out again.
#2: only 2 throttle profiles?
Multiple one touch attempts.
DX3R TX,Spectrum RX,8.5 Vulcan,2S 30C,Deans plugs,w and w/o power cap
(glitch buster),Air Servo,17/90 gearing in a Associated T-4 2WD truck.
I get green blinky in reverse mode but truck just stutters.(5% reverse?)
Re set expo,sub trim,travel lots of times looking for reverse.
Bound RX and even went to a copy another models settings.
Runs fine,otherwise.
GTB 3 instructions are incomplete!
I had to dig out my GTB2 instructions to set drag brake,etc.
I did such a nice install,I would HATE to pull it out again.
04-08-2014 | 01:20 PM
#2
#1: No reverse.
#2: only 2 throttle profiles?
Multiple one touch attempts.
DX3R TX,Spectrum RX,8.5 Vulcan,2S 30C,Deans plugs,w and w/o power cap
(glitch buster),Air Servo,17/90 gearing in a Associated T-4 2WD truck.
I get green blinky in reverse mode but truck just stutters.(5% reverse?)
Re set expo,sub trim,travel lots of times looking for reverse.
Bound RX and even went to a copy another models settings.
Runs fine,otherwise.
GTB 3 instructions are incomplete!
I had to dig out my GTB2 instructions to set drag brake,etc.
I did such a nice install,I would HATE to pull it out again.
#2: only 2 throttle profiles?
Multiple one touch attempts.
DX3R TX,Spectrum RX,8.5 Vulcan,2S 30C,Deans plugs,w and w/o power cap
(glitch buster),Air Servo,17/90 gearing in a Associated T-4 2WD truck.
I get green blinky in reverse mode but truck just stutters.(5% reverse?)
Re set expo,sub trim,travel lots of times looking for reverse.
Bound RX and even went to a copy another models settings.
Runs fine,otherwise.
GTB 3 instructions are incomplete!
I had to dig out my GTB2 instructions to set drag brake,etc.
I did such a nice install,I would HATE to pull it out again.
http://teamnovak.com/file_download/1...ck%20Guide.pdf
It was NOT in the box....
04-08-2014 | 01:41 PM
#3
This is what Charlie at Novak sent me."Track Guide"
http://teamnovak.com/file_download/1...ck%20Guide.pdf
It was NOT in the box....
http://teamnovak.com/file_download/1...ck%20Guide.pdf
It was NOT in the box....
Issue solved. I have ALL features functional,now.
Now,I'm gonna go break it! WHEEEEEEEE!
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
