Is there any 1/10 size ESC that fit/made for a 4pole non sensor motor.
Most of the 1/10 ESC i have read the spes for is "suited for 2pole". So if you know any ESC made for 4pole NON SENSOR, please let us know!!

This is a link to a 540 size 4pole 4200kv motor + sensorless 80 amp ESC combo from Hobbyking.
If you just want the sensorless ESC you can just search for it on Hobbyking's ESC category.
But I think this combo is too hard to pass up at less than $70.

castle sidewinder and mmp do 4 pole sensorless motors. Hobbywing Sct pro do 4 pole sensor less motors. I think the tekin rx8 does 4 pole sesorless motors. here are just a few that work.

The Viper Copperhead doesn't require a sensor.

Any of the Xerun ESC's (60A or 120A) will run a 4 pole sensorless easily.

It's mainly esc's with a rev limit function that have problems.

Castle sidewinder comes with a 4 pole when I ordered the esc motor combo.

Ok, many good tips, Thankz. I. Have a tekin rs pro, any good advice of setting for this on 4pole sensorless?

Don't. Its not rated for a 4 pole.

Ok, we have some guys running rs pro on 4pole, and they have issues! Then it seems like hw is the choise, though it should fit in a 1/16 buggy!