Community
Wiki Posts
Search

Nitro On-Road

Thread Tools
 
Search this Thread
 
Old 12-29-2004 | 09:41 AM
  #2221  
pitshop's Avatar
Tech Elite
iTrader: (56)
 
Joined: Sep 2001
Posts: 3,765
Default

LAST DAY FOR ALL THE NEW GOODIES!!!!!!!!!!

WE WILL BE CLOSED TILL THE 30TH SO THIS IS THE LAST CHANCE FOR YOU TO PICK UP ALL THOSE NEW GOODIES!!!

PROTOFORM BODIES
PROTOFORM WINGS
PROLINE TIRES AND BODIES
NOVAK GTX
NOVAK MATCHED BATTS
NOVAK SMART TRAY
NOVAK HEAVY DUTY ESC
NOVAK XXTRA AND XXL
YOKOMO SDW
YOKOMO CGM
YOKOMO HOP UPS
YOKOMO DRIFT TIRES/WHEELS/BODIES - NEW!!!
RAYSPEED HOP UPS
LOSI LST
TRAXXAS REVO
TRAXXAS EMAXX
PARMA NITRO SCENTS

AND CRAP LOADS MORE!!!!!!!!

HAPPY NEW YEAR!!!!!!!!!!!!!!!!!!!!!!!

capitol speedway closed on 31 Dec and 1 Jan
pitshop is offline  
Old 12-30-2004 | 01:12 AM
  #2222  
judd's Avatar
Tech Regular
iTrader: (1)
 
Joined: Mar 2002
Posts: 310
From: toyota panasonic
Default engine problem...

guys ang hirap nang i start ung engine ko (gs15r) to the point na lumalaki na ung biceps ko ayaw pa din mag start... nu kaya problem nyan?? minsan ayaw pa bumalik ung pull start.. gagalawin ko pa ng konti ung flywheel para bumalik... hrrrr.. nu kaya problem?? if ever how much ba mag pa tune up ng engine??? salamat!
judd is offline  
Old 12-30-2004 | 03:12 PM
  #2223  
it's Avatar
it
Tech Regular
 
Joined: Feb 2003
Posts: 389
From: Bolingbrook
Default Re: engine problem...

Originally posted by judd
guys ang hirap nang i start ung engine ko (gs15r) to the point na lumalaki na ung biceps ko ayaw pa din mag start... nu kaya problem nyan?? minsan ayaw pa bumalik ung pull start.. gagalawin ko pa ng konti ung flywheel para bumalik... hrrrr.. nu kaya problem?? if ever how much ba mag pa tune up ng engine??? salamat!
Happy Holidays!!!!

Just be patient!!!

1. Make sure glow plug is good.
2.Make sure Igniter is good.
3.Make sure there is fuel on the line or @ least right by the carb.
4. Check if your fuel is still good. One time I had a lot of problems from O donnell 20%. Some of us might have a different opinion, but I did had problems with bad fuel especially here because its most of the time cold.

Hints!! Do not pull as much as 2 feet, this is not a lawn mower. If everything was correct 2 to 3 pulls the motor should start.

GS motors from Kyosho is like OS. So just try this. HIgh needle 3 from close, Low end 2.5 from close. Also, make sure that the line or the carb does not have a leak!!!


Hopefully this works and have fun practicing.!!!!!


BTW! If you just here in Chicago Every tuning is free. There are lot of Engine GURU here.
it is offline  
Old 12-31-2004 | 10:44 AM
  #2224  
Tech Rookie
 
Joined: Nov 2004
Posts: 9
From: Quezon City Katipunan Philippines
Lightbulb may races pa ba for my 1:10 serpent impulse?

san ba ko pwede mag race using my serpent impulse? or my vector?
carlofcuk5 is offline  
Old 12-31-2004 | 07:05 PM
  #2225  
Tech Adept
 
Joined: Mar 2004
Posts: 187
From: batangas, philippines
Default Re: may races pa ba for my 1:10 serpent impulse?

Originally posted by carlofcuk5
san ba ko pwede mag race using my serpent impulse? or my vector?
you can try sa fort bro, SPEEDZONE..
cabworks is offline  
Old 12-31-2004 | 11:59 PM
  #2226  
judd's Avatar
Tech Regular
iTrader: (1)
 
Joined: Mar 2002
Posts: 310
From: toyota panasonic
Default glow plug...

pano ba i check kung ok pa un glow plug? diba pag tinangal mo ung plug sa engine tapos kinabit mo sa igniter mo dapat iilaw un.... tama ba???

and how much ba isang gnun??? salamat!!!
judd is offline  
Old 01-01-2005 | 12:59 AM
  #2227  
doki_doki's Avatar
Tech Elite
iTrader: (2)
 
Joined: Dec 2003
Posts: 3,840
From: Cebu City, Philippines and Ocala, Florida, USA
Default Re: glow plug...

Originally posted by judd
pano ba i check kung ok pa un glow plug? diba pag tinangal mo ung plug sa engine tapos kinabit mo sa igniter mo dapat iilaw un.... tama ba???

and how much ba isang gnun??? salamat!!!
tama yan pare... you could also check if hindi ba deformed yung coil nang glow plug mo. if deformed na then it's time to change it. a standard glow plug cost around P200-P250. i recomment using OS glow plug #8 for your GS15R engine. i've tried using it na with Kyosho engine and no problems with it...hope this helps pare
doki_doki is offline  
Old 01-01-2005 | 01:03 AM
  #2228  
doki_doki's Avatar
Tech Elite
iTrader: (2)
 
Joined: Dec 2003
Posts: 3,840
From: Cebu City, Philippines and Ocala, Florida, USA
Default Re: engine problem...

Originally posted by judd
guys ang hirap nang i start ung engine ko (gs15r) to the point na lumalaki na ung biceps ko ayaw pa din mag start... nu kaya problem nyan?? minsan ayaw pa bumalik ung pull start.. gagalawin ko pa ng konti ung flywheel para bumalik... hrrrr.. nu kaya problem?? if ever how much ba mag pa tune up ng engine??? salamat!
pare...looks like parang malapit na masira yung pull starter nang engine mo. don't pull too hard sa pill start mo pare baka ma sira yan. ok yung advise ni it na around 2 feet lang extension an pull starter cord mo. if properly tuned yung engine mo, even one pull is enough to start your engine. you can also check the needle settings. for the high end needel, you can start at2 to 3 turns out from the closed position. sa low end, 2.5 to 3 turns out from the closed position. also, try to set your idle needle that around 3-5mm opening sa card mo at idle position...
doki_doki is offline  
Old 01-01-2005 | 01:04 AM
  #2229  
doki_doki's Avatar
Tech Elite
iTrader: (2)
 
Joined: Dec 2003
Posts: 3,840
From: Cebu City, Philippines and Ocala, Florida, USA
Default Re: Re: may races pa ba for my 1:10 serpent impulse?

Originally posted by cabworks
you can try sa fort bro, SPEEDZONE..
woah...may races ba for 1:8 scale on road kits??? ganda tingnan nun ah...very fast
doki_doki is offline  
Old 01-01-2005 | 02:42 AM
  #2230  
buboy28's Avatar
Tech Master
 
Joined: Jun 2003
Posts: 1,601
From: manila,philippines
Default Re: Re: Re: may races pa ba for my 1:10 serpent impulse?

Originally posted by doki_doki
woah...may races ba for 1:8 scale on road kits??? ganda tingnan nun ah...very fast
doki doki, d ko alam kung nagkaroon na 1/8 on road race dito manila pero ang alam ko race track na pwede venue nuon ay sa montalban race track kasi yung lang ang alam ko na pwede ang 1/8 na kits
buboy28 is offline  
Old 01-01-2005 | 06:49 AM
  #2231  
judd's Avatar
Tech Regular
iTrader: (1)
 
Joined: Mar 2002
Posts: 310
From: toyota panasonic
Default Re: Re: glow plug...

Originally posted by doki_doki
tama yan pare... you could also check if hindi ba deformed yung coil nang glow plug mo. if deformed na then it's time to change it. a standard glow plug cost around P200-P250. i recomment using OS glow plug #8 for your GS15R engine. i've tried using it na with Kyosho engine and no problems with it...hope this helps pare
sir how much ba ung o.s. plug? salamat sir sa tip...
judd is offline  
Old 01-01-2005 | 02:15 PM
  #2232  
doki_doki's Avatar
Tech Elite
iTrader: (2)
 
Joined: Dec 2003
Posts: 3,840
From: Cebu City, Philippines and Ocala, Florida, USA
Default Re: glow plug...

Originally posted by judd
sir how much ba ung o.s. plug? salamat sir sa tip...
yung OS glow plug #8 is around P200-P250...
doki_doki is offline  
Old 01-01-2005 | 02:18 PM
  #2233  
doki_doki's Avatar
Tech Elite
iTrader: (2)
 
Joined: Dec 2003
Posts: 3,840
From: Cebu City, Philippines and Ocala, Florida, USA
Default Re: may races pa ba for my 1:10 serpent impulse?

Originally posted by buboy28
doki doki, d ko alam kung nagkaroon na 1/8 on road race dito manila pero ang alam ko race track na pwede venue nuon ay sa montalban race track kasi yung lang ang alam ko na pwede ang 1/8 na kits
i see...sayang, i really want to see races of 1:8 scale on road kits. sobrang bilis siguro yun...i saw one race of 1:8 scale on road kits sa tv..hanep...sobrang bilis. downside to it is that mas madaling masira yung kits pag nag bang-gaan...
doki_doki is offline  
Old 01-01-2005 | 03:55 PM
  #2234  
ianhobbies's Avatar
Tech Master
iTrader: (3)
 
Joined: Dec 2001
Posts: 1,456
From: Costa Del Sol, Marbella, Spain www.bradir.net
Default 1/8 scale racing

have you seen one of raywood's rc videos? check them out here at www.raywoodrcvideos.com
ianhobbies is offline  
Old 01-02-2005 | 04:44 AM
  #2235  
doki_doki's Avatar
Tech Elite
iTrader: (2)
 
Joined: Dec 2003
Posts: 3,840
From: Cebu City, Philippines and Ocala, Florida, USA
Default Re: 1/8 scale racing

Originally posted by ianhobbies
have you seen one of raywood's rc videos? check them out here at www.raywoodrcvideos.com
thanks for the link pare...
doki_doki is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.