38LikesTekno ET48 Thread
11-23-2013 | 03:41 AM
#632
Tech Elite
Joined: Aug 2007
Posts: 2,315
From: Belgium.
That is just a test body. We should be getting our production bodies shortly.
The traction drive is a great option for rough, rutted tracks. Be sure to set your mesh a little tighter than you normally would. There is a slight deflection of the traction drive center shaft away from the spur under hard acceleration or stress (casing a jump). Setting your mesh normally will result in premature wearing of the spur and clutch bell.
The traction drive is a great option for rough, rutted tracks. Be sure to set your mesh a little tighter than you normally would. There is a slight deflection of the traction drive center shaft away from the spur under hard acceleration or stress (casing a jump). Setting your mesh normally will result in premature wearing of the spur and clutch bell.
11-24-2013 | 07:14 AM
#636
that is about what I was thinking pricewise based on what the Eb48 was listed for. Don't be surprised if it drops a little even its available., maybe $519 from stormer.
tower will probably keep this kind of price though sinc when other places had the eb48 for 499 ish, tower stuck with 549.
tower will probably keep this kind of price though sinc when other places had the eb48 for 499 ish, tower stuck with 549.
11-24-2013 | 07:07 PM
#637
Tech Regular
Joined: Dec 2008
Posts: 365
Think this would make a good 4s basher? It's either this or the eb48.2 for me. My son is really getting into my rc habit and we need something that will stay together. The truggy would probablly be better for rough terrain but would the weight be tough on 4s?
Tekno you rule! We have allot of your parts on our other trucks now we need your actual entire truck lol. You've come a long way since impakt rc.
Tekno you rule! We have allot of your parts on our other trucks now we need your actual entire truck lol. You've come a long way since impakt rc.
11-25-2013 | 12:57 PM
#641
