R/C Tech Forums

Go Back  R/C Tech Forums > General Forums > Electric On-Road
The Speed Passion Thread >

The Speed Passion Thread

Register
FAQ
Community
Wiki Posts
Calendar
Today's Posts
Search
Vendor Directory
Like Tree57Likes

The Speed Passion Thread

Thread Tools
 
Search this Thread
 
Old 09-04-2013 | 02:20 AM
  #12001  
cheapskate.brok
Tech Elite
iTrader: (10)
 
Joined: Jan 2009
Posts: 2,172
Default
Originally Posted by lil_man72
hello, maybe someone here can help me with the reventon pro. i just picked up 2 of these used from rctech for sale threads. i've tried to hook both of them up with the same results.
the motor is a speed passion 13.5 from the durango rtr car, airtronics rec, savox 1258 servo, and venom battery. the stock cirtix speedo works fine with all of these but both reventons make a cogging sound and barley turn the motor while making a horrible noise and the motor gets hot real quick.
what's wrong with these speedos or am i doing something wrong?
all wires have been double checked and are hooked up correctly. the sensor wire works great with the cirtix speedo.
any help would be great.
to me, it sounds like a shorted esc. Any difference when running without the sensor cable? I have the same problem with my Tekin RS Pro.
cheapskate.brok is offline  
Reply
Old 09-04-2013 | 07:14 AM
  #12002  
Timbo99's Avatar
Timbo99
Tech Regular
iTrader: (14)
 
Joined: Mar 2010
Posts: 385
From: Melbourne AUSTRALIA
Default
Originally Posted by cheapskate.brok
to me, it sounds like a shorted esc. Any difference when running without the sensor cable? I have the same problem with my Tekin RS Pro.
Shorted ESC for sure......got yourself a paperweight sorry to say.
Timbo99 is offline  
Reply
Old 09-04-2013 | 07:21 AM
  #12003  
Timbo99's Avatar
Timbo99
Tech Regular
iTrader: (14)
 
Joined: Mar 2010
Posts: 385
From: Melbourne AUSTRALIA
Default
Originally Posted by yodace
opps sorry man thought this was the speed passion thread..

double post..sorry
Hey mate,what IIGOOD4u or whatever meant (before biting your head off)was this link on this page.Quote:
Originally Posted by Dog Runner
I'm confused as to where to get the most recent software for the reventon pro. Is it via the computer or the wifi module/app or somewhere else?

What version number is the most recent software?

If its a computer program, does it work on a Mac ?

Thanks for any help.
You can find the latest version of the software below, entitled Reventon PC Program with USB Driver V1.1.0.22:
http://www.speedpassion.net/en/download.asp

As I stated a few replies above yours, I am running the program on a Mac, but not natively.

I am running the current version of OSX and installed an old version of XP SP3 that I've had lying around.

If you aren't really computer savvy, I would skip the XP install and install Windows 7 via Bootcamp as it will be much easier.

Installing the Speed Passion program itself is pretty simple, unzip the program, install the USB driver, locate the driver in com ports and double click or right click? to assign it properly and complete the driver installation.

After that, install the PC program, connect your ESC, and the rest is simple.
Timbo99 is offline  
Reply
Old 09-05-2013 | 05:21 AM
  #12004  
Gtr r34 m-spec
Tech Regular
iTrader: (29)
 
Joined: Mar 2012
Posts: 259
Default
Hi - is it better to run the muchmore felta 4 software with the speed passion revention pro, or is it just the same between the two? On the petit rc website, they say the muchmore is better.
Thanks
Gtr r34 m-spec is offline  
Reply
Old 09-05-2013 | 10:19 AM
  #12005  
JayL's Avatar
JayL
R/C Tech Elite Member
 
Joined: Mar 2006
Posts: 3,111
From: Ca
Default
the much more software is mostly better for blinky
JayL is offline  
Reply
Old 09-06-2013 | 08:11 PM
  #12006  
lil_man72's Avatar
lil_man72
Tech Regular
iTrader: (29)
 
Joined: Sep 2008
Posts: 354
From: raytown, mo.
Default
Originally Posted by beamcat
If you have one of the earlier reventon pro. Check the pins inside the sensor cable plug in the esc. Mine one of them got pushed in causing the same issue.....
figured it out guys thanks.
lil_man72 is offline  
Reply
Old 09-07-2013 | 01:33 AM
  #12007  
Catharsis_UA
Tech Rookie
 
Joined: May 2013
Posts: 5
From: Ukraine
Default
Fragile bottom deck on Your Reventon Pro? No Probem
Attached Thumbnails The Speed Passion Thread-1.jpg   The Speed Passion Thread-2.jpg  
Catharsis_UA is offline  
Reply
Old 09-07-2013 | 03:50 PM
  #12008  
poop
Tech Addict
iTrader: (27)
 
Joined: Nov 2003
Posts: 676
From: Brisbane
Default
hi all,
hoping someone can help me
my reventon pro would switch off by itself after a race. running blinky with V20 in 17.5. esc is barely warm after the run.
any ideas?
thanks!
poop is offline  
Reply
Old 09-07-2013 | 09:47 PM
  #12009  
metalnut's Avatar
metalnut
Tech Elite
iTrader: (36)
 
Joined: Feb 2013
Posts: 2,726
From: Seattle
Default
Originally Posted by poop
hi all,
hoping someone can help me
my reventon pro would switch off by itself after a race. running blinky with V20 in 17.5. esc is barely warm after the run.
any ideas?
thanks!
Check your soldering, especially the black/ground wire. That's my only guess.
metalnut is offline  
Reply
Old 09-07-2013 | 10:00 PM
  #12010  
vr6cj's Avatar
vr6cj
Tech Elite
iTrader: (124)
 
Joined: Jul 2008
Posts: 4,050
From: Modesto, CA
Default
Originally Posted by Catharsis_UA
Fragile bottom deck on Your Reventon Pro? No Probem
You guys test that on dusty tracks? Dirt gets in these speedo's all the time and I would be worried about shorts with the dirt touching the metal plate and arching. Probably why the original one is plastic.
vr6cj is offline  
Reply
Old 09-08-2013 | 05:11 AM
  #12011  
Timbo99's Avatar
Timbo99
Tech Regular
iTrader: (14)
 
Joined: Mar 2010
Posts: 385
From: Melbourne AUSTRALIA
Default .........?........?
Originally Posted by vr6cj
You guys test that on dusty tracks? Dirt gets in these speedo's all the time and I would be worried about shorts with the dirt touching the metal plate and arching. Probably why the original one is plastic.
I really don't mean to offend you,but that is the stupidest statement I have ever read.
Timbo99 is offline  
Reply
Old 09-08-2013 | 10:41 AM
  #12012  
vr6cj's Avatar
vr6cj
Tech Elite
iTrader: (124)
 
Joined: Jul 2008
Posts: 4,050
From: Modesto, CA
Default
Originally Posted by Timbo99
I really don't mean to offend you,but that is the stupidest statement I have ever read.
lol, maybe so but Ive had one my reventons all rdy burn up due to sand in the case. It shorted the bottom board. Offroad track not onroad though
vr6cj is offline  
Reply
Old 09-08-2013 | 04:22 PM
  #12013  
poop
Tech Addict
iTrader: (27)
 
Joined: Nov 2003
Posts: 676
From: Brisbane
Default
Originally Posted by metalnut
Check your soldering, especially the black/ground wire. That's my only guess.
cheers. will check and give it a go. thanks!
poop is offline  
Reply
Old 09-08-2013 | 07:40 PM
  #12014  
Sydewynder
Tech Elite
 
Joined: Aug 2001
Posts: 2,583
Default
Originally Posted by Manny
Does anyone know where I can get a programming box for the Cirtix ESC? Have they been discontinued?
Is this what you're looking for?
Sydewynder is offline  
Reply
Old 09-11-2013 | 06:13 AM
  #12015  
Fredp1's Avatar
Fredp1
Tech Regular
iTrader: (11)
 
Joined: Mar 2013
Posts: 393
From: Sydney, Australia
Default Firmware update for LCD Professional Program card
I have 2 program boxes,
a translucent Blue one:- Reventon SMART LCD Program card, version 2 .7
and a Black one:- LCD Professional Program card, version 1.07_110119.

The black box will not connect to any of the Reventon ESC's or connect to the PC software 1.1.022

Is the black LCD Professional program card compatible with the Reventon ESC's?
What is the latest version of the Black box and how do you update it?

Thanks
Fred
Fredp1 is offline  
Reply



Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.