Here you go.
http://www.aliexpress.com/store/prod...814216542.html

There's another alternative where to buy parts from but unfortunately for me they don't ship to S.Africa

The cheapest source for me for EMB spareparts will be Apexmodels in the UK, will be trying them out soon.

Bit the bullet and paid $15 shippin on a $5 part
Oh yeah may be a month ta get here----

try schumacher (www.racing-cars.com) their the UK distributor I'm sure their international postage may be a bit cheaper.. (fingers crossed)

They were out of stock too--
Dunno whats up w/the spindle-but the alum parts a few pages back look sweet;If they are ever avail---
love the car but parts --like spindles should be a priority

Here's my Tacon with the HK3800 outrunner. Likin it a lot and kudos for the stock gear cover...

How is that esc running with the HK motor? Also are u running 3s?

I have the HK 3800 in my buggy on 3S. It runs ice cold without the body on, but overheats in 5 mins without the airflow. I just installed a HW 60A ESC to see how it does, but I haven't run it yet.

this thing is pretty sweet.

what do ou guys do with the shock's?

there a little to stiff no??

I put 15wt oil and Losi springs on mine and it's still too stiff. I have a pair of the soft springs I'm going to try next.

So far no issues with the stock esc but I'm only running 2s. With the 19 tooth pinion I don't see needing 3s for the backyard bashing I'm doing. For speed runs, maybe...

For the shocks, I drilled the piston holes bigger & use 25wt AE oil. Going to try the Losi m8t soft springs.

I really hope LC Racing redesigns the battery "Positioner Mount Set" PN L6008. Adjusting the length is OK with the longer chassis of the SCT and Rally. But I wish these kits could accept wider batteries.

Anyone else feel the same?

It doesn't bother me. What did you have in mind? When I was running a hardcase battery that didn't fit I just clipped off the outside "ear" of the mount. The Velcro strap held it in place fine.

I put the carisma soft springset on and 10 wt.

Now it's pretty low to the ground. Perfect for indoor off road course.

I will try soft carisma springs and 15 or 20 wt shock oil for out side.

O yeah i drilled the pistons to 1.2 mm holes.

I tried 1 mm holes but 1.2 is best!!