I can't imagine running the TT-01 against other chassis.

Just looking to have a little fun.

Actually I am running it. I run it in a spec TT-01 class at my local track.

Also, I don't believe I said any of those things.

What wheel base do i build for this TT-01 Type E chassis?
http://www3.towerhobbies.com/cgi-bin...=TAMC8541&P=OW

If you go to the Tower listing of the car on the page you sited, it's 190MM.

http://www3.towerhobbies.com/cgi-bin...&I=LXCVNP&P=OW

is there an upgrade for the out drives of the TT-01 Type E? The stock ones don't look like they will hold up well.

I ran the stock out drives for a long time without any issues.

do they make a front and rear cvd set for the tt-01 type E

http://www.thetoyz.com/Tamiya/TT01/S...3racing/10994/

http://www.ebay.com/itm/HARD-STEEL-F...-/110794976972

Here are a couple. I am sure there are others. I think some of these require different out drives but you'll have to find out about that.

can I run theme in the TCS race?

No.

http://www.tamiyausa.com/product/ite...oduct-id=53792

On the Tamiya Website these are listed under hop up options for the TT01 E. These would be legal for the TCS, except in the Spec/Novice Class. They are not listed as an approved option for that class.

need a servo that will work well with the TT-01 Type E I have a savox shorty servo but its not lining up well.

You may not want to ask me...

I've got a Traxxas 2075 that I got off of ebay for $10 in mine.

Works fine.

cool I will have to check it out. thanx for the info everybody.